Catalogs >
Teledyne API >
Analyzers for Nitrogen Compounds T200

Analyzers for Nitrogen Compounds T200
2Pages

Catalog excerpts

Analyzers for Nitrogen Compounds T200 - 1

ADVANCED POLLUTION INSTRUMENTATION Model T200 Chemiluminescence NO/N02/NOx Analyzer The Model T200 NO/N02/NOx analyzer uses the proven chemiluminescence detection principle, coupled with state-of- the-art electronics to allow accurate and dependable low level measurements for use as an ambient analyzer or dilution CEMS A unique AutoZero feature provides superb stability by continuously correcting for zero drift, while advanced Adaptive Filtering allows the analyzer to optimize performance under changing conditions. The Model T200 includes a permeation inlet dryer for ozone generation to provide excellent reliability with no periodic replacement required. A catalytic exhaust ozone scrubber is standard for maximum safety and pump life. All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports either locally or by remote connection using the included APIcom™ software. user selectable ►► Independent ranges and auto ranging ►► Large, vivid, and durable color graphics display with touch screen ►► Front panel USB connections for peripheral devices and firmware ►► 8 analog inputs (optional) ►► Adaptive signal filtering optimizes response time ►► Internal zero & span check (optional) ►► Comprehensive internal data logging with programmable averaging periods ►► Ability to log virtually any operating Free Custom&r Support by t&l&phon& and email for the life of the instrument

Open the catalog to page 1

Analyzers for Nitrogen Compounds T200 - 2

How to Order Model T200 includes: General Ranges: Min: 0-50 ppb Full scale Max: 0-20,000 ppb Full scale (selectable, independent NO, NO2, NOx ranges and auto ranging supported) ppb, ppm, μg/m3, mg/m3 (selectable) < 0.2 ppb (RMS) < 0.5% of reading (RMS) above 50 ppb 0.4 ppb < 0.5 ppb/24 hours < 0.5% of full scale/24 hours 20 seconds < 60 seconds to 95% 1% of full scale 0.5% of reading above 50 ppb 500 cm3/min ±10% Measurement Units: Zero Noise: Span Noise: Lower Detectable Limit: Zero Drift: Span Drift: Lag Time: Rise and Fall Time: Linearity: Precision: Sample Flow Rate: Two year warranty...

Open the catalog to page 2