Catalogs >
Teledyne API >
Analyzers for Carbon Compounds 300EU

Analyzers for Carbon Compounds 300EU
2Pages

Catalog excerpts

Analyzers for Carbon Compounds 300EU - 1

Gas Filter Correlation Trace Level CO Analyzer U S The Model 300EU Trace Level Carbon Monoxide analyzer has been designed specifically to address the challenges of background, low level CO monitoring such as that required by the NCore monitoring network. Using a Gas Filter Correlation Wheel, a high energy IR source alternately passes through a CO filled chamber and a chamber with no CO present. The light path then travels through the sample cell, which has a folded measurement path of 14 meters. The energy loss through the sample cell is compared with the zero reference provided by the gas filter to produce a signal proportional to concentration. Standard two year warranty Ranges, 0-100 ppb to 0-100 ppm, user selectable Based on our proven Model 300E, there are significant enhancements to optimize trace level CO measurement. The objective and field mirrors in the sample cell are gold plated to maximize the signal to noise performance of the Gas Filter Wheel for CO specific measurement Model 300EU. The optical bench is enclosed in a 14 meter path length for sensitivity dramatically reduces instrument noise and temperature Microprocessor controlled for versatility Multi-tasking software allows viewing of test variables during operation Continuous self checking with alarms temperature-controlled, convection heated oven which related drift. A Nafion® dryer significantly reduces interferences from humidity changes in the sample gas. Additionally, the analyzer periodically monitors and corrects its baseline by routing the sample stream through a heated, platinum CO scrubber. This function, called Auto Reference, helps to correct instrument drift Bi-directional RS-232 for remote operation Digital status outputs indicate instrument operating condition and eliminate any CO2 interferences. Auto Reference is user-programmable to occur from once per hour to once per day as deemed necessary for sampling conditions. Built-in data acquisition and internal memory allow Adaptive signal filtering optimizes response time logging multiple parameters including average and GFC wheel guaranteed against leaks for 5 years diagnostics. Stored data are easily retrieved through the instantaneous values, calibration data and operating serial port or optional Ethernet port via APIcom software or Temperature & Pressure compensation from the instrument front panel. The operator can then Internal data logging with 1 min to 24 hour averages perform predictive maintenance and enhanced data analysis by tracking parameter trends. APIcom remote operation software FREE Customer Support by telephone and email for the life of the instrument

Open the catalog to page 1

Analyzers for Carbon Compounds 300EU - 2

Trace Level CO Analyzer Zero Noise: Span Noise: Lower Detectable Limit (LDL): Zero Drift: Span Drift: Rise and Fall Time: Sample Flow Rate: Operating Temperature Range: 0-100 ppb to 0-100 ppm full scale, user selectable. Dual ranges and auto ranging Analog Outputs: Bipolar, 10V, 5V, 1V, 0.1V, selectable Serial Outputs: Serial Port 1: RS-232 (DB-9M) Serial Port 2: standard RS-232 or optional Status (Digital) 8 outputs, 6 inputs (opto-isolated), 6 alarm outputs (optional) Current Output: Optional 4-20mA, select up to three channels NOTE: The values expressed above are in accordance with EPA...

Open the catalog to page 2