Series 9060 Zirconium Oxide Flue Gas Analyzers

Product catalog summary

Overview
The Teledyne Series 9060 Zirconium Oxide Flue Gas Oxygen Analyzers are designed to optimize combustion efficiency and minimize exhaust emissions in industrial processes. The series includes two models, 9060 and 9060L, both offering reliable O2 monitoring capabilities using zirconium oxide sensor technology combined with a microprocessor-based controller.

Model 9060 Control Unit
The 9060 model provides in-situ analysis for furnaces, kilns, and boilers, accepting signals from up to two zirconia probes. It features a compact, steel, NEMA-4 enclosure suitable for wall mounting, with options for purged or explosion-proof designs for hazardous areas. The unit is equipped with a 7-key membrane keyboard and a 2-line alphanumeric LCD for easy setup and operation.

Calibration and Diagnostics
The 9060 includes programmable automatic calibration and auto-purge outputs, with a probe diagnostic loop to monitor probe impedance. It offers two isolated 4-20mADC linearized control signal outputs and RS-232/RS-485 interface capabilities. Additional features include an integral automatic reference pump and multiple alarm options.

Model 9060L
The 9060L is a low-cost option with field-configurable ranges between 1% and 25% oxygen, AutoRanging capability, and optional full-scale range up to 100%. It includes programmable failsafe concentration alarms and a large, 4-digit LED display. The model is designed for indoor installation but can be modified for outdoor use.

Probe Configurations
The series offers various probe configurations, including heated and unheated designs for different temperature ranges and applications. Probes are available in varying lengths and explosion-proof types, suitable for applications such as gas, oil, coal boilers, kilns, and furnaces.

Specifications

Model 9060: Accuracy of ±1% of actual measured oxygen value, response time of 90% in less than 4 seconds, and power requirements of 120 or 240 VAC.
Model 9060L: Accuracy of ±2% of full scale at constant temperature, response time of 90% in less than 20 seconds, and power requirements of 110 or 220 VAC.

Warranty
The instrument is warranted for 1 year against defects in material or workmanship. Specifications and features are subject to change without notice.

Catalog excerpts

Series 9060 Zirconium Oxide Flue Gas Analyzers-1

TELEDYNE ANALYTICAL INSTRUMENTS Two controllers to choose from Zirconium Oxide Flue Gas Oxygen Analyzers

Open the catalog to page 1

Series 9060 Zirconium Oxide Flue Gas Analyzers-2

Series 9060: Zirconium Oxide Flue Gas Oxygen Analyzers ptimizing combustion efficiency and minimizing exhaust emissions are important for proper operation of nearly every industrial process that burns fuel. From clean burning natural gas to dirty coal fired kilns, Teledyne’s Series 9060 provides reliable and efficient O2 monitoring capabilities by combining field proven zirconium oxide sensor technology with a powerful and versatile microprocessor based controller. Model 9060 Control Unit The 9060 O2 analyzer / transmitter provides in-situ analysis capability which can accept signals from up...

Open the catalog to page 2

Series 9060 Zirconium Oxide Flue Gas Analyzers-3

PROBE SELECTION Probe Lengths Probes can be purchased in varying lengths and explosion proof types are available. Contact Teledyne with your application needs. Connection cable between probe and controller: Heated probes - 6 wire cable required Unheated probes - 4 wire cable required TAI can provide interconnection cables if requested. black liquor boilers • Cement, lime and ceramic kilns • Refinery process heaters and • Blast furnace ovens • Soaking pit and heat treating Thermal cracking furnaces Catalyst regeneration Asphalt processes Utility boilers WTELEDYNE ANALYTICAL INSTRUMENTS POWER ALARM...

Open the catalog to page 3

Series 9060 Zirconium Oxide Flue Gas Analyzers-4

Two user-selectable ranges between 0-1 and 0-100% ±2% of full scale at constant temperature; ±5% of full scale over operating temperature (once temperature equilibrium is reached; at 3% and higher user-defined ranges) Field selectable linear from 0-1% to 0100% O2 Accuracy and Repeatability: ±1% of actual measured oxygen value with a repeatability of ±0.5% of measured value. Response time: 90% in less than 4 seconds - typical Two linearized isolated 4-20mADC signals 4-20 mA isolated output 600 ohms Response time: 90% in less than 20 seconds at 25°C Common alarm relay with 20 alarm functions and...

Open the catalog to page 4