TELEDYNE ANALYTICAL INSTRUMENTS • Unaffected by hydrocarbons, H2, or CO2 • Easy to handle, inexpensive, and easy to replace • Can apply to ppb, ppm, and percent ranges Zirconium Oxide -- 3300Z • Quick response time • Long life / service on clean, non-corrosive streams • No shelf life concerns Trace & Percent Oxygen Analyzers Fuel Cell • Zirconium Oxide • Paramagnetic Sensing Technologies he 3300 series of low cost, microprocessor-based instruments are specifically designed to satisfy industry’s need for a simple yet highly reliable process analyzer. These unit offer excellent accuracy, ease of use, high reliability, low maintenance and a variety of standard features usually found on more expensive instruments. One Platform, Multiple Configurations The 3300 series is a cost-effective solution to many process applications. With three different sensing technologies to choose from and multiple design configurations, a customized unit for a given application is easily secured. Sensing ranges are varied based on the oxygen sensor and technology used. All units come with auto ranging capability and a 0-25% calibration range. Fully adjustable high or low concentration alarms provide the versatility to satisfy nearly any requirement. Sensing Technologies • Can be applied on a wide variety of applications Paramagnetic -- 3300M • Long life / service in clean gas streams • High accuracy • Can be applied on corrosive, high temperature applications • Fast response times (even on CO2 streams) Outputs for Data Transmission A standard 0-10 VDC output provides range identification, while the oxygen concentration is output through 4-20 mADC negative ground and 0-10 VDC negative ground signals. An optional unidirectional RS-232 serial interface can be incorporated to relay information to a host computer for remote monitoring, making information and analysis results as close as a personal computer. Configurations • (A) - 19” rack mount • (B) - Wall mount enclosure Advantages • Customer selectable ranges • Auto ranging capabilities The 3300 Series is available with three sensing technologies, each with their own benefits. • Fully adjustable high or low alarm setpoints with corresponding relay contacts • Digital interface allows monitoring from a remote station • Disposable, no maintenance sensor design • Specific to oxygen • Linear from 0 - 100% O2 • Absolute Zero (no O2, no output); single point calibration only • Sensor failure alarm Options • RS-232 serial interface for remote monitoring Built for reliability and performance

Series 3300 trace / percent Oxygen AnalyzerS series Trace oxygen analyzers SPECIFICATIONS 3300P 0-1 to 0-25% oxygen (03% and 0-10% default) 3300M Two ranges with autoranging capability; field configurable between 03% and 0-10% 3300Z Please contact the factory Calibration range: 3300T Two ranges with autoranging capability; field configurable between 0-10 ppm and 0-10,000 ppm 0 to 25% O2 ±2% FS at constant temp, ±5% FS over operating temperature (once temperature equilibrium is reached). Higher accuracy is available for special configurations. 90% in less than 45 90% in less than 10 90% in less...