Catalogs >
Teledyne Analytical Instruments >
Series 320 - 320B, 320BRC, 320P and 320P/D portable oxygen analyzers

Series 320 - 320B, 320BRC, 320P and 320P/D portable oxygen analyzers
2Pages

Catalog excerpts

Series 320 - 320B, 320BRC, 320P and 320P/D portable oxygen analyzers - 1

When used to monitor boilers, fireboxes, and process streams, these analyzers can safeguard combustion processes from insufficient or excessive oxygen conditions. The 320P/D also offers a digital, liquid crystal display (LCD) with a readability / resolution of ±0.1% oxygen. Linear range is 0-100% oxygen. The Series 320 requires no warm up, making it ideal for quick, spot checking analysis. Its accuracy is assured by a cost-effective calibration method using atmospheric air rather than zero or span gases. FEATURES • Fast, accurate response • Maintenance free sensor • Rugged and completely portable • Rechargeable NiCad batteries • Integral recharge circuit • Pushbutton activated built-in pump (320P Series) • Sample filter (320P Series) • Digital meter (320BRCD & 320P/D) • Air calibration; no zero or span gases The Model 320BRC meets the United States Pharmacopoeia criteria as a reference method for detecting the amount of oxygen in medical air supplies. OPTIONS • 100 VAC or 220 VAC, 50 / 60 Hz recharge circuit • Special ranges • Carrying case: aluminum / steel clad, foam interior (P/N C-416) • Flow-thru adapter (P/N 9913) • mVDC output signal Teledyne’s rugged 320 Series of Portable Oxygen Analyzers are designed for use in a wide variety of applications from diving to fine tuning boilers. Lightweight (less than 6 lbs. / 2.7 kg) and easy to use, these units utilize Teledyne’s own Micro-fuel Cell sensor for quick and accurate analysis of oxygen. This maintenance-free, sealed, electrochemical cell is specific to oxygen, insensitive to flow rate, and has a 90% response in less than 7 seconds. At the end of its life, the cell is discarded and replaced like a flashlight battery. A unique Cell-Saver cap preserves the sensor from exposure to air, thereby prolonging its operational life. The rugged 320 Series is powered with rechargeable NiCad batteries. The integral NiCad batteries have an expected life of 5 years (minimum). Fully charged, the batteries provide over one month of continuous operation (320BRC series), and recharging is accomplished overnight (14 hours). The built-in charger requires a 115 VAC, 50 / 60 Hz electrical source (100 VAC or 220 VAC, 50 / 60 Hz optional). Teledyne’s portable flue gas oxygen analyzers are specifically designed to improve efficiency, lower fuel costs, and reduce explosive hazards in such applications as power plants, refineries, chemical / petrochemical plants, and steel making. SERIES 320 Portable Oxygen Analyzers TELEDYNE ANALYTICAL INSTRUMENTS Built for Reliability and Performance Model 320BRC Model 320P

Open the catalog to page 1

Series 320 - 320B, 320BRC, 320P and 320P/D portable oxygen analyzers - 2

SERIES 320 PORTABLE OXYGEN ANALYZERS 320BRC 320P 320BRCD & 320P/D Ranges 0-5, 0-25, and 0-100% oxygen (switch selectable) - optional ranges available 0-5, 0-10, and 0-25% oxygen (switch selectable) - optional ranges available 0 to 100% oxygen Sensitivity 0.5% of full scale Accuracy ±2% of full scale at constant temperature; ±5% of reading throughout the operating temperature range (once temperature equilibrium is achieved) ±1% of oxygen reading at constant temperature; ±3% of oxygen over temperature range Operating temp range 32 to 122°F (0 to 50°C) Response time 90% < 7 seconds with B-1...

Open the catalog to page 2