TELEDYNE ANALYTICAL INSTRUMENTS Trace and Percent Oxygen Transmitter

eledyne has redefined the ease and simplicity of detecting either ppm or percent levels of oxygen in a process with a single device – the INSTA TRANS™ O2 transmitter. By applying lessons learned from our Series 300T & 300P intrinsically safe oxygen transmitter designs introduced in the late 1980s, and adding parameters required by today’s users, the Insta Trans offers unprecedented: • Quick recovery on ppm O2 applications (when changing out sensors) Cost effectiveness FLEXIBILITY The Insta Trans is a two-wire, loop-powered 4-20 mA oxygen transmitter packaged within a weather tight NEMA4 housing....

INTRINSICALLY SAFE DESIGN The Insta Trans can be used in a general purpose, nonhazardous environment or a hazardous area. When used in Division 1 or equivalent hazardous / classified locations, the Insta Trans must be installed in conjunction with optional intrinsic safety barriers. The Insta Trans is designed as instrinsically safe for use in Class I, Division 1, Groups A, B, C, & D hazardous areas or EExiaIICT4 (60°C), and certified by Factory Mutual and BASEEFA. The Insta Trans is self-certified by Teledyne as suitable for Class I, Division 2 areas without the use of I/S barriers utilizing...

InstaTrans Oxygen Transmitter SPECIFICATIONS Ranges: % of range; 4-20 mADC non-isolated (power loop) Wetted parts: 316 stainless steel, viton o-ring, gold and nylon contact plate ±1% of full scale for all ranges at constant temperature NEMA 4 rated stainless steel and aluminum Operating temp: Response time: (10 – 90% @ 1.8 SPLM @ 24°C with B2C sensor) < 40 seconds on 0-10 ppm range < 15 seconds on 0-100 ppm range 1/8" stainless steel tube Sensor type: Voltage requirements: 9.3 – 30 vDC Weight: Panel indicators: PPM, %, RUN, FIN, and COR; ppm or percent oxygen range; fine and coarse span adjustment...