Catalogs >
Teledyne Analytical Instruments >
Model GB300 - Percent Portable Oxygen Analyzer

Model GB300 - Percent Portable Oxygen Analyzer
1Pages

Catalog excerpts

Model GB300 - Percent Portable Oxygen Analyzer - 1

eledyne’s hand-held GB300 Portable Percent Oxygen Analyzer is designed for use in a wide variety of applications from diving to fine tuning boilers. Lightweight and easy to use, the GB300 incorporates Teledyne’s own Micro-fuel Cell sensor for quick and accurate analysis of oxygen. This maintenancefree, sealed, electrochemical cell is specific to oxygen, insensitive to flow rate, and has a 90% response in less than 10 seconds. At the end of its life, the cell is discarded and replaced like a flashlight battery. ±2% of FS at constant temperature and pressure Response time: 90% of step change in less than 10 seconds Operating temp: Battery life: Sensor type: Sensor life: Sensor cable: Signal output: Optional Items 12 months covers defects in material and workmanship; excludes sensor life Constructed of high impact Percent Portable resistant materials, the Oxygen Analyzer GB300 provides unparalleled performance under the harshest conditions. The unit is powered by 3 AA batteries which should last for at least 2000 hours of use. Specifications Measuring range: 0-100% oxygen • Battery charge indicator • One key operation (On / Off / Cal) • Auto diagnostics with error codes to simplify troubleshooting • Instrument carrying case • Teledyne’s own I-17 sensor • Sensor interconnection cable • Barbed hose adapter (P/N F-1717) which allows for connection of 1/4” flexible tubing • T adapter (P/N A-268) Built for Reliability and Performance TELEDYNE ANALYTICAL INSTRUMENTS A Teledyne Technologies Company 16830 Chestnut Street City of Industry, California 91748, USA TEL: 626-934-1500 or 888-789-8168 FAX: 626-934-1651 EMAIL: ask_tai@teledyne.com © 2011 Teledyne Analytical Instruments, A Teledyne Technologies Company. All rights reserved. Printed in the USA. 05/11TB Instrument is warranted for 1 year against defects in material or workmanship NOTE: Specifications and features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. All specifications and features are subject to change without notice.

Open the catalog to page 1