Catalog excerpts
SPACEMASTER™ SERIES Description ■ Operation mode and max sensing range: Thru-beam: 0-20 m Diffuse proximity: 0-1 m Retro reflective: 0,1-3 m Fibre: Dependent on fibre optic ■ Cable or plug connection ■ Sensitivity adjustment via potentiometer ■ Switch selectable light or dark function ■ Power and output indicators ■ High tolerance to hostile environments ■ 10-30 V dc supply voltage ■ 4 wire, NPN/PNP transistor output or 4 wire, ambivalent PNP/PNP transistor output ■ Test input The 7000 series consists of a self-contained transmitter SMT, and a receiver SMR which are to be used in thru-beam mode, an SMP for diffuse proximity, SMRR for retro reflective and an SMPF for use with fibre optic cables. All are offered with sensitivity adjustment via integral potentiometer, and with either cable or plug connection. The complete series is available either as 4 wire, NPN/PNP transistor output or 4 wire ambivalent PNP/PNP output, and with a 10-30 V dc supply voltage, both offering switch selectable light or dark function. The SMR is available with either a 0.5 ms response time and a 7 metre range or with a 2 ms response time and a 20 metre range. The control input in the SMT is intended to be used for disabling or enabling the transmitting power temporarily for test purpose or for multiplexing applications. The complete series is protected against reverse polarity of power supplies, control input and output signals. The output is protected against short circuit and inductive loads. Technical Data Telco f WWW.TELCOSENSORS.COM SELF-CONTAINED PHOTOELECTRIC SYSTEMS I 1
Open the catalog to page 1SPACEMASTER™ SERIES Environmental Data Available Types Stainless Steel Stainless Steel Fibre Sensor Note: Reflector to be ordered separately. 2 I SELF-CONTAINED PHOTOELECTRIC SYSTEMS Telco /sensors
Open the catalog to page 24 pin, M8 4 pin, M12 Sensor Plug (Male) Cable Plug (Female) White Brown Blue Black Sensor Plug (Male) Cable Plug (Female) Refer to page 175 for extension cables. SMP / SMPF / SMRR 76xx Load as NPN *Do not connect white wire *Do not connect white wire SMP / SMPF / SMRR 76xx Load as PNP Telco / sensors SELF-CONTAINED PHOTOELECTRIC SYSTEMS I 3
Open the catalog to page 3SMR / SMP / SMRR / SMPF* 76xx TP/TS 5 SMR / SMP / SMRR / SMPF* 76xx TP/TS T4 Output indicator Light/dark switch Power on indicator Sensitivity adjustment Output indicator Light/dark switch Power on indicator Sensitivity adjustment Output indicator Light/dark switch Power on indicator Sensitivity adjustment SMR / SMP / SMRR / SMPF* 76xx TP/TS J Signal indicator Power on indicator Sensitivity adjustment Signal indicator Power on indicator Sensitivity adjustment Side view Signal indicator Power on indicator Sensitivity adjustment SELF-CONTAINED PHOTOELECTRIC SYSTEMS
Open the catalog to page 4Sensing Characteristics Parallel Displacement SMP 7600 with 20cm x 20cm white paper SMP 7601 with 20cm x 20cm white paper SMRR 7600 with Ø84mm reflector
Open the catalog to page 5SM 7000 Sensing Characteristics Angular Displacement SELF-CONTAINED PHOTOELECTRIC SYSTEMS Telco reserves the right to change specifications without notice.
Open the catalog to page 6All Telco Sensors catalogs and technical brochures
-
SM 3000/CAT2
4 Pages
-
SG 2 Series
4 Pages
-
SM 3000 series
5 Pages
-
SM 6000 series
5 Pages
-
SP 2000
6 Pages
-
SM 8000 Series
5 Pages
-
SM 9000 Series
4 Pages
-
Remote Sensors Series
6 Pages
-
PA 01 Series
2 Pages
-
PA 10 Series
2 Pages
-
PA 11 Series
2 Pages
-
PA 15 Series
3 Pages
-
MPA 21 Series
2 Pages
-
MPA 41 Series
3 Pages
-
MPA 81 Series
4 Pages
-
PAB 10 Series
3 Pages
-
PAB 20 Series
3 Pages
-
PAB 30 Series
3 Pages
-
SG 11 Series
5 Pages
-
SGC 11 Series
5 Pages
-
SG 1 Series
8 Pages
-
SG 10 Series
5 Pages
-
SG 14 Series
6 Pages
-
OFS series
3 Pages
-
PP 00 series
2 Pages
-
SGC 1 series
2 Pages
-
SS 01 series
8 Pages
-
Introducing the SG 1
24 Pages