SPACEMASTER™ SERIES Description ■ Operation mode and max sensing range: Thru-beam: 1-6 m ■ Cable or plug connection ■ Sensitivity adjustment via control input ■ Wide variety of housings ■ Power and output indicators ■ High tolerance to hostile environments ■ 10-32 V dc supply voltage ■ 3 wire, NPN or PNP output or 4 wire, NPN/PNP opto isolated output ■ 5 or 0,5 ms response time ■ Low current consumption ■ Test input ■ Available with optional © ATEX approval The 6000 series consists of a self-contained transmitter SMT, and a receiver SMR, which are to be used in thru-beam mode. The complete series is available in a wide range of housings with either plug or cable connection. The SMR is supplied with a 10-32 V dc supply voltage with either a 3 wire, NPN or PNP or as a 4 wire, NPN/PNP opto-isolated transistor output with a choice between light or dark function. The SMR is available with either a 0,5 ms response time and a 2 metre range, or with a 5 ms response time and a 6 metre range. The control input in the SMT may be used for either disabling or enabling the transmitting power temporarily for test purpose, multiplexing applications or as a gradual regulation of the transmitting power level. Both the transmitter and receiver are protected against reverse polarity of power supplies, control input and output signals. The output is also protected against short circuit and inductive loads. Technical Data Telco f WWW.TELCOSENSORS.COM SELF-CONTAINED PHOTOELECTRIC SYSTEMS I

SPACEMASTER™ SERIES Environmental Data Note: 1. Sensors marked 1 do not have power on or output indicators incorporated. 2. SM 6000 Series with stainless steel housing and cable connection is available to comply with ATEX ^x> II 3 G Ex nA IIC T6 Gc and II 3D Ex tc IIIC T100 °C Dc. Add “/EX” after the series number e.g. SMR 6006/EX TS 5. Sensors marked 2 are available to comply with ATEX approval. 2 I SELF-CONTAINED PHOTOELECTRIC SYSTEMS Telco /sensors

SPACEMASTER™ SERIES Available Types Note: 1. Sensors marked 1 do not have power on or output indicators incorporated. 2. SM 6000 Series with stainless steel housing and cable connection is available to comply with ATEX ^x> II 3 G Ex nA IIC T6 Gc and II 3D Ex tc IIIC T100 °C Dc. Add “/EX” after the series number e.g. SMR 6002/EX TS 5. Sensors marked 2 are available to comply with ATEX approval. Sensor Plug (Male) Cable Plug (Female) Black Brown Blue Sensor Plug (Male) Cable Plug (Female) White Brown Blue Black Sensor Plug (Male) Cable Plug (Female) Brown White Blue Black Refer to page 175 for...

SMT 6000 1-6 m Variable range and ON/OFF switch for transmitting power Control Switch White Black SELF-CONTAINED PHOTOELECTRIC SYSTEMS

Sensing Characteristics Parallel Displacement Angular Displacement Telco reserves the right to change specifications without notice.