video corpo

SG 2 Series

SG 2 Series

SG 2 Series

Product catalog summary
Overview: The SG 2 light curtain system is designed for elevator door modernization, featuring a self-contained transmitter (SGT) and receiver (SGR) positioned opposite each other. It offers a sensing range of 0-4 meters with 94 cross scanning beams and an active height of 1800 mm.
Specifications: The system operates with a 12-36 V DC supply voltage and includes a 5-wire solid state relay output. It features automatic sensitivity adjustment, a slim housing design (10x28 mm), and indicators for power, output, and signal status. The system is protected against reverse polarity and short circuits.
Features: Key features include a blanking function for up to 10 channels, a test input for disabling/enabling transmitting power, and a time-out function for ignoring up to 2 non-adjacent channels if obstructed for over 10 seconds. The system supports both static and dynamic applications.
Technical Data: The SGT and SGR units have a current consumption of 100 mA and 50 mA respectively. The light source is infrared at 940 nm, with 20 channels and a response time of less than 40 ms. The housing is made of anodized aluminum with a polycarbonate lens cover.
Environmental Data: The system operates within a temperature range of -20 to +65 °C and can be stored between -40 to +80 °C. It has a light immunity of 100,000 lux at 5° incidence and is rated IP 54 for sealing.
Installation and Dimensions: The system includes a 3 m flexible cable connection and is available in lengths of 2000 mm or 2100 mm. Detailed dimensions and mounting instructions are provided for proper installation.
Applications: The SG 2 series is suitable for applications requiring precise detection and safety measures, particularly in elevator systems.
See more

Catalog excerpts

SG 2 Series-1

SPACEGUARD™ SERIES Description ■ 0-4 m sensing range ■ 94 cross scanning beams ■ Active height of 1800 mm ■ Length 2000 mm or 2100 mm ■ Flexible cable connection ■ Automatic sensitivity adjustment ■ Slim line (10x28 mm) housing ■ Power, output and signal status indicators ■ 12-36 V dc supply voltage ■ Blanking function of up to 10 channels ■ 5 wire, solid state relay output ■ Test input ■ Light/dark function via control wire The SG 2 light curtain system is designed for modernisation of elevator doors and consists of a self-contained transmitter, SGT and receiver, SGR, which are to be positioned opposite of each other. The detectors are housed in an aluminium profile available in a slim line design (10 x 28 mm). The SGR is supplied with a 12-36 V dc power supply with a 5 wire, solid state relay output and with wire selectable light or dark function. The test input in the SGT may be used for either disabling or enabling the transmitting power temporarily for test purposes. The light curtains are available with time-out function which allows up to 2 non-adjacent channels to be ignored if permanently obstructed for 10 seconds or more. The advanced automatic signal-tracking (AST) feature ensures that no onsite set up or adjustments are required. The signal level of each individual channel is adjusted automatically compensating for misalignment and contamination during operation. Transmitter and receiver units are optically synchronised. The system can be used both in static and dynamic applications. The special blanking function allows up to 10 top channels to be ignored when covered/masked during set up. This feature allows the active height to be reduced for applications which do not allow the full detection height. Both the transmitter and receiver units are protected against reverse polarity of power supplies, control input and output signals. The output is also protected against short circuit and inductive loads. Technical Data Telco f WWW.TELCOSENSORS.COM SELF-CONTAINED LIGHT CURTAIN SYSTEMS I

 Open the catalog to page 1
SG 2 Series-2

SPACEGUARD™ SERIES Environmental Data Available Types Solid State Relay DO/LO (NO/NC) 2 I SELF-CONTAINED LIGHT CURTAIN SYSTEMS Test Input Telco /sensors

 Open the catalog to page 2
SG 2 Series-3

Dimensions and Descriptions Slim Line A Details 550 System status indicator (SGR) Output indicator (SGR) Power on indicator (SGT/SGR) Bottom View Cross Section SGT/SGR Side View SGT/SGR Rear View 10 14 17,5 Bottom Side View Bottom Rear View 100 SGT/SGR Side View SGT/SGR Rear View SELF-CONTAINED LIGHT CURTAIN SYSTEM

 Open the catalog to page 3
SG 2 Series-4

Active Height Sensing Characteristics Parallel Displacement Telco reserves the right to change specifications without notice. SELF-CONTAINED LIGHT CURTAIN SYSTEMS

 Open the catalog to page 4

All Telco Sensors catalogs and technical brochures

  1. SM 3000/CAT2

    4  Pages

  2. SP 2000

    6  Pages

  3. PA 01 Series

    2  Pages

  4. PA 10 Series

    2  Pages

  5. PA 11 Series

    2  Pages

  6. PA 15 Series

    3  Pages

  7. MPA 21 Series

    2  Pages

  8. MPA 41 Series

    3  Pages

  9. MPA 81 Series

    4  Pages

  10. PAB 10 Series

    3  Pages

  11. PAB 20 Series

    3  Pages

  12. PAB 30 Series

    3  Pages

  13. SG 11 Series

    5  Pages

  14. SGC 11 Series

    5  Pages

  15. SG 1 Series

    8  Pages

  16. SG 10 Series

    5  Pages

  17. SG 14 Series

    6  Pages

  18. OFS series

    3  Pages

  19. PP 00 series

    2  Pages

  20. SGC 1 series

    2  Pages

  21. SS 01 series

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.