video corpo

SG 10 Series


Catalog excerpts

SG 10 Series - 1

SPACEGUARD™ SERIES Description ■ 1-10 m sensing range ■ 34 to 274 cross scanning beams ■ Active height of 650 mm to 2535 mm ■ Length of 850 mm to 2800 mm ■ Cable or plug connection ■ Automatic sensitivity adjustment ■ Water-resistant, slim line (12x30 mm) housing ■ Power, output and signal status indicators ■ 12-36 V dc supply voltage ■ 5 wire, solid state relay output ■ Test input ■ Light/dark selection via control wire The SG 10 light curtain system consists of a self-contained transmitter SGT and receiver, SGR, which are to be positioned opposite of each other. The detectors are housed in a water-resistant, aluminium profile available in a slim line design (12 x 30 mm). The SGR is supplied with a 12-36 V dc power supply with a 5 wire, solid state relay output, and wire selectable light or dark function. The test input in the SGT may be used for either disabling or enabling the transmitting power temporarily for test purposes. The advanced automatic signal-tracking (AST) feature ensures that no onsite set up or adjustments are required. The signal level of each individual channel is adjusted automatically, which compensates for misalignment and contamination during operation. Transmitter and receiver are optically synchronised. Specialised signal processing technology, designed for outdoor environments, reduces the risk of false detections of water, rain or snow that may pass between the light curtains during operation. Both the transmitter and receiver units are protected against reverse polarity of power supplies, control input and output signals. The output is also protected against short circuit and inductive loads. Technical Data Telco sensors SELF-CONTAINED LIGHT CURTAIN SYSTEMS I 1

Open the catalog to page 1
SG 10 Series - 2

SPACEGUARD™ SERIES Environmental Data Note: 1. The transmitter SGT and receiver SGR set must have the same number of channels and beam spacing. 2. SG 10 series is optionally available with Master/Slave electrical synchronisation (SG 10 M/S series) which ensures that optical cross-talk between two neighbouring sets is prevented. 2 I SELF-CONTAINED LIGHT CURTAIN SYSTEMS Telco /sensors

Open the catalog to page 2
SG 10 Series - 3

Test Input SGT 10 Connect black test input wire to + or - to disable SGT /sensors WWW.TELCOSENSORS.COM SELF-CONTAINED LIGHT CURTAIN SYSTEMS I 3

Open the catalog to page 3
SG 10 Series - 4

SG 10 Dimensions and Descriptions Slim Line C Details 200 System status indicator (SGR) Output indicator (SGR) Power on indicator (SGT/SGR) Bottom View Cross Section SGT/SGR Side View SGT/SGR Rear View Bottom Side View Bottom Rear View Note: Drawing shows model with M12 plug. SELF-CONTAINED LIGHT CURTAIN SYSTEMS

Open the catalog to page 4
SG 10 Series - 5

Beam Patterns Active Height (refer to Available Types) Active Height (refer to Available Types) Sensing Characteristics Parallel Displacement Telco reserves the right to change specifications without notice. SELF-CONTAINED LIGHT CURTAIN SYS

Open the catalog to page 5

All Telco Sensors catalogs and technical brochures

  1. SM 3000/CAT2

    4 Pages

  2. SG 2 Series

    4 Pages

  3. SP 2000

    6 Pages

  4. PA 01 Series

    2 Pages

  5. PA 10 Series

    2 Pages

  6. PA 11 Series

    2 Pages

  7. PA 15 Series

    3 Pages

  8. SG 11 Series

    5 Pages

  9. SG 1 Series

    8 Pages

  10. SG 14 Series

    6 Pages

  11. OFS series

    3 Pages

  12. PP 00 series

    2 Pages

  13. SGC 1 series

    2 Pages

  14. SS 01 series

    8 Pages