SG 1 Series
8Pages

{{requestButtons}}

Catalog excerpts

SG 1 Series - 1

SPACEGUARD™ SERIES Description ■ 0-4 m sensing range ■ 34 to 194 cross scanning beams ■ Active height of 650 mm to 1800 mm ■ Length of 850 mm to 2100 mm ■ Flexible cable connection ■ Automatic sensitivity adjustment ■ Slim line (10x28 mm), leading edge (37,5x13 mm) or water-resistant slim line (12x30 mm) housing ■ Power, output and signal status indicators ■ 12-36 V dc supply voltage ■ 5 wire, solid state relay output ■ Test input ■ Time-out function via control wire ■ Static and dynamic applications The SG 1 light curtain system consists of a self-contained transmitter SGT and receiver SGR, which are to be positioned opposite of each other. The detectors are housed in a sturdy aluminium profile available in a slim line design (10 x 28 mm), a leading edge design (37,5 x 13 mm) or a water-resistant slim line design (12 x 30 mm). The SGR is supplied with a 12-36 V dc power supply with a 5 wire, solid state relay output, and a choice of light or dark function. The test input in the SGT may be used for either disabling or enabling the transmitting power temporarily for test purposes. The light curtains also include time-out function, which allows a pre-set number of non-adjacent channels to be automatically ignored if permanently obstructed for 10 seconds or more. This function can be enabled or disabled via the control wire. The advanced automatic signal-tracking (AST) feature ensures that no onsite set up or adjustments are required. The signal level of each individual channel is adjusted automatically compensating for misalignment and contamination during operation. Transmitter and receiver are optically synchronised. The system can be used both in static and dynamic installations. Both the transmitter and receiver units are protected against reverse polarity of power supplies, control input and output signals. The output is also protected against short circuit and inductive loads. Technical Data SELF-CONTAINED LIGHT CURTAIN SYSTEMS I 1

Open the catalog to page 1
SG 1 Series - 2

SPACEGUARD™ SERIES Environmental Data Note: 1. The transmitter SGT and receiver SGR set must have the same number of channels and beam spacing. 2. The transmitter SGT is available in a long range model to be used in conjunction with standard receiver SGR. Sensing range is increased by 50%. Add “H” after the series number of the SGT for long range model, e.g. SGT 1H-200-040-A1-A-00-3F. 2 I SELF-CONTAINED LIGHT CURTAIN SYSTEMS Telco /sensors

Open the catalog to page 2
SG 1 Series - 3

SPACEGUARD™ SERIESAvailable Types Leading Edge B Note: 1. The transmitter SGT and receiver SGR set must have the same number of channels and beam spacing. 2. The transmitter SGT is available in a long range model to be used in conjunction with standard receiver SGR. Sensing range is increased by 50%. Add “H” after the series number of the SGT for long range model, e.g. SGT 1H-200-040-A1-B-00-3F. /sensors WWW.TELCOSENSORS.COM SELF-CONTAINED LIGHT CURTAIN SYSTEMS I 3

Open the catalog to page 3
SG 1 Series - 4

SPACEGUARD™ SERIESAvailable Types Slim Line C Note: 1. The transmitter SGT and receiver SGR set must have the same number of channels and beam spacing. 2. The transmitter SGT is available in a long range model to be used in conjunction with standard receiver SGR. Sensing range is increased by 50%. Add “ H” after the series number of the SGT for long range model, e.g. SGT 1H-200-040-A1-C-00-3F. Brown Black Black Blue White 4 I SELF-CONTAINED LIGHT CURTAIN SYSTEMS Telco /sensors

Open the catalog to page 4
SG 1 Series - 5

Dimensions and Descriptions Slim Line A Details 100 System status indicator (SGR) Output indicator (SGR) Power on indicator (SGT/SGR) Bottom View Cross Section SGT/SGR Side View SGT/SGR Rear View 14 17,5 Bottom Side View Bottom Rear View SGT/SGR Rear View SELF-CONTAINED LIGHT CURTAIN SYSTEM

Open the catalog to page 5
SG 1 Series - 6

SG 1 Dimensions and Descriptions Leading Edge B Details SGT Top Front View (shown with screw cover strip) SGR Top Front View (shown without screw cover strip) 6 System status indicator Output indicator Power on indicator Bottom View Cross Section Bottom View Cross Section 37,5 14,5 18 Bottom Front View Bottom Front View SELF-CONTAINED LIGHT CURTAIN SYSTEMS

Open the catalog to page 6
SG 1 Series - 7

Dimensions and Descriptions Slim Line C Details 200 System status indicator (SGR) Output indicator (SGR) Power on indicator (SGT/SGR) Ø8 Bottom View Cross Section 3,5 SGT/SGR Side View Bottom Side View SGT/SGR Rear View Bottom Rear View SELF-CONTAINED LIGHT CURTAIN SYSTEMS

Open the catalog to page 7
SG 1 Series - 8

Active Height (refer to Available Types) Active Height (refer to Available Types) 92 mm channel spacing (Units in mm) Sensing Characteristics Parallel Displacement Telco reserves the right to change specifications without notice. SELF-CONTAINED LIGHT CURTAIN SYSTEMS

Open the catalog to page 8

All Telco Sensors catalogs and technical brochures

  1. SM 3000/CAT2

    4 Pages

  2. SG 2 Series

    4 Pages

  3. SP 2000

    6 Pages

  4. PA 01 Series

    2 Pages

  5. PA 10 Series

    2 Pages

  6. PA 11 Series

    2 Pages

  7. PA 15 Series

    3 Pages

  8. SG 11 Series

    5 Pages

  9. SG 10 Series

    5 Pages

  10. SG 14 Series

    6 Pages

  11. OFS series

    3 Pages

  12. PP 00 series

    2 Pages

  13. SGC 1 series

    2 Pages

  14. SS 01 series

    8 Pages