PHOTOELECTRIC AMPLIFIER BUS SERIES Description ■ Operation mode and max sensing range: Thru-beam: 0-47 m Diffuse proximity: 0-2,6 m ■ 10-30 V dc and 24 V ac supply voltage ■ Manual sensitivity adjustment ■ Sensor LED-drive ■ Automatic sensor test ■ Adjustable on/off time delay ■ 3 relay or 3 transistor outputs ■ Switch selectable light or dark function ■ Switch selectable long or short range ■ Test input ■ Power, output, alarm, signal level and master/slave indicators ■ Alarm output ■ DIN rail mounting with bus function The PAB 30 is a 3-channel, multiplexed, photoelectric amplifier, which is to be used in conjunction with 3 sets of remote transmitters LT and receivers LR from the series 100, 110 and 120. The 3 channels operate independently of each other with their own set of remote transmitter and receiver. The multiplexing function ensures that optical cross talk between channels is prevented. This amplifier series offers manual sensitivity adjustment, for each individual channel, via an integral potentiometer located on the front panel of the amplifier. The series offers a choice between 3 individual relay or 3 individual transistor outputs, with an adjustable 0-10 sec on/off time delay. Light or dark function and long or short range are switch selectable. The amplifiers from the PAB 30 A series can be connected together with up to 9 amplifiers from the PAB series via a bus rail connector positioned on the DIN rail, to form a modular master/slave system with up to a total of 30 channels. The bus connection enables communication between the amplifiers, which allows the channels of all the amplifiers to be multiplexed ensuring that optical cross talk between channels is prevented and allows a common output from the amplifier modules. Both the PAB 30 A and PAB 30 S can share power supply via the bus connection. The amplifier offers a test input, which is used for either disabling or enabling the transmitting power temporarily for test purposes. The amplifier includes an alarm output, which is used to indicate if the signal level is insufficient or if a sensor is faulty. The sensor LED drive powers the optional monitor LEDs available on the remote sensors -output (LT) and power (LR). Technical Data Telco f WWW.TELCOSENSORS.COM REMOTE PHOTOELECTRIC SYST

PHOTOELECTRIC AMPLIFIER BUS SERIES Environmental Data Available Types Note: Remote sensors and bus rail connector to be ordered separately. Applicable Remote Sensors and Ranges Response Times in Bus Connection PAB 30 A Note: “N” is equal to the total number of channels connected in the bus connection. Wiring Diagrams Black Shield Alarm Supply Black Shield Alarm Supply Black Shield Black Shield Black Shield Black Shield Relay output 2 I REMOTE PHOTOELECTRIC SYSTEMS Black Shield Black Shield

PHOTOELECTRIC AMPLIFIER BUS SERIES Power on indicator Master/slave indicator Signal level indicator Output indicator Alarm indicator Master/slave rotary selector Master – M Slave – 1-9 Long/short switch Light/dark switch Common/individual output switch Bus/single mode switch Sensitivity adjustment On delay adjustment Off delay adjustment * Shown with Bus Rail Connector 22,5 connected in position (to be ordered separately). Power on indicator Signal level indicator Output indicator Alarm indicator Long/short switch Light/dark switch Common/individual output switch Sensitivity adjustment Connectors...