Catalog excerpts
PHOTOELECTRIC AMPLIFIER BUS SERIES Description ■ Operation mode and max sensing range: Thru-beam: 0-70 m Diffuse proximity: 0-4 m ■ 10-30 V dc and 24 V ac supply voltage ■ Manual sensitivity adjustment ■ Sensor LED-drive ■ Automatic sensor test ■ Adjustable on/off time delay ■ 1 relay or 1 transistor output ■ Switch selectable light or dark function ■ Switch selectable long or short range ■ Test input ■ Power, output, alarm, signal level and master/slave indicators ■ Alarm output ■ DIN rail mounting with bus function The PAB 10 is a 1-channel photoelectric amplifier, which is to be used in conjunction with a set of remote transmitter LT and receiver LR from the series 100, 110 and 120. This amplifier series offers manual sensitivity adjustment via an integral potentiometer located on the front panel of the amplifier. Output can be selected from either a relay or transistor output, with an adjustable 0-10 sec on/off time delay. Light or dark function and long or short range are switch selectable. The amplifiers from the PAB 10 A series can be connected together with up to 9 amplifiers from the PAB series via a bus rail connector positioned on the DIN rail, to form a modular master/slave system with up to a total of 28 channels. The bus connection enables communication between the amplifiers, which allows the channels of all the amplifiers to be multiplexed ensuring that optical cross talk between channels is prevented and allows a common output from the amplifier modules. Both the PAB 10 A and PAB 10 S can share power supply via the bus connection. The amplifier offers a test input, which is used for either disabling or enabling the transmitting power temporarily for test purposes. The amplifier includes an alarm output, which is used to indicate if the signal level is insufficient or if a sensor is faulty. The sensor LED drive powers the optional monitor LEDs available on the remote sensors - output (LT) and power (LR). Technical Data Telco f WWW.TELCOSENSORS.COM REMOTE PHOTOELECTRIC SYST
Open the catalog to page 1PHOTOELECTRIC AMPLIFIER BUS SERIES Environmental Data Note: “N” is equal to the total number of channels connected in the bus connection. Wiring Diagrams Alarm Supply Relay output 2 I REMOTE PHOTOELECTRIC SYSTEMS Telco /sensors
Open the catalog to page 2PHOTOELECTRIC AMPLIFIER BUS SERIES Power on indicator Master/slave indicator Signal level indicator Output indicator Alarm indicator Sensitivity adjustment Master/slave rotary selector Master – M Slave – 1-9 1 M 9 Long/short switch Light/dark switch Common/individual output switch Bus/single mode switch On delay adjustment Off delay adjustment * Shown with Bus Rail Connector 22,5 connected in position (to be ordered separately). Power on indicator Signal level indicator Output indicator Alarm indicator Sensitivity adjustment Long/short switch Light/dark switch On delay adjustment Off delay...
Open the catalog to page 3All Telco Sensors catalogs and technical brochures
-
SM 3000/CAT2
4 Pages
-
SG 2 Series
4 Pages
-
SM 3000 series
5 Pages
-
SM 6000 series
5 Pages
-
SM 7000 series
6 Pages
-
SP 2000
6 Pages
-
SM 8000 Series
5 Pages
-
SM 9000 Series
4 Pages
-
Remote Sensors Series
6 Pages
-
PA 01 Series
2 Pages
-
PA 10 Series
2 Pages
-
PA 11 Series
2 Pages
-
PA 15 Series
3 Pages
-
MPA 21 Series
2 Pages
-
MPA 41 Series
3 Pages
-
MPA 81 Series
4 Pages
-
PAB 20 Series
3 Pages
-
PAB 30 Series
3 Pages
-
SG 11 Series
5 Pages
-
SGC 11 Series
5 Pages
-
SG 1 Series
8 Pages
-
SG 10 Series
5 Pages
-
SG 14 Series
6 Pages
-
OFS series
3 Pages
-
PP 00 series
2 Pages
-
SGC 1 series
2 Pages
-
SS 01 series
8 Pages
-
Introducing the SG 1
24 Pages