video corpo

PA 15 Series

PA 15 Series

PA 15 Series

Product catalog summary
Overview: The PA 15 is a 1-channel photoelectric amplifier designed for use with remote transmitter LT and receiver LR from series 100, 110, and 120. It features manual sensitivity adjustment, selectable output types, and various operational modes.
Specifications:
  • Operation Modes: Thru-beam (0-70 m), Diffuse proximity (0-5 m)
  • Supply Voltage: 24 V ac/dc
  • Output Options: 1 relay or 1 transistor output
  • Adjustable On/Off Time Delay: 0-10 sec
  • Switch Selectable Functions: Light/Dark, Long/Short Range
  • Indicators: Power, Output, Sensor Test, Signal Level
  • Alarm Output: Indicates insufficient signal or sensor fault
  • Mounting: DIN rail
Technical Data:
  • Supply Voltage: 15-30 V dc or 24 V ac
  • Voltage Tolerance: +/- 10%
  • Current Consumption: Max. 2.5 W
  • Relay Output: 250 V ac / 3 A, 120 V ac / 5 A
  • Transistor Output: 30 V dc / 60 mA
  • Alarm Output: Transistor 12-30 V dc / 10 mA
  • Operation Frequency: Relay 14 Hz, Transistor 20 Hz
  • Response Time: Relay 35 ms, Transistor 25 ms
  • Housing Material: Polyamide
Environmental Data:
  • Operating Temperature: -10 to +50 ºC
  • Storage Temperature: -40 to +80 ºC
  • Sealing Class: IP 40
Applicable Remote Sensors and Ranges:
  • Series 100: Thru Beam 18 m, Diffuse Proximity 1.3 m
  • Series 110: Thru Beam 40 m, Diffuse Proximity 2.7 m
  • Series 120: Thru Beam 70 m, Diffuse Proximity 5.0 m
Additional Features:
  • Manual sensitivity adjustment via front panel potentiometer
  • Microprocessor-controlled sensor test for fault detection
  • Test input for temporary disabling/enabling of transmitting power
  • Sensor LED drive for optional monitor LEDs on remote sensors
See more

Catalog excerpts

PA 15 Series-1

PHOTOELECTRIC AMPLIFIER SERIESDescription ■ Operation mode and max sensing range: Thru-beam: 0-70 m Diffuse proximity: 0-5 m ■ 24 V ac/dc supply voltage ■ Manual sensitivity adjustment ■ Sensor LED-drive ■ Automatic sensor test ■ Adjustable on/off time delay ■ 1 relay or 1 transistor output ■ Switch selectable light or dark function ■ Switch selectable long or short range ■ Test input ■ Power, output, sensor test and signal level indicators ■ Alarm output ■ DIN rail mounting The PA 15 is a 1-channel photoelectric amplifier, which is to be used in conjunction with a set of remote transmitter LT and receiver LR from the series 100, 110 and 120. This amplifier series offers manual sensitivity adjustment via an integral potentiometer located on the front panel of the amplifier. Output can be selected from either a relay or transistor output, with or without an adjustable 0-10 sec on/off time delay. Light or dark function and long or short range are switch selectable. The microprocessor controlled sensor test ensures that the system will automatically detect and indicate a faulty transmitter or receiver - cable break or electrical failure - during operation, through the relevant LED located on the front panel. The amplifier offers a test input, which is used for either disabling or enabling the transmitting power temporarily for test purposes. The amplifier includes an alarm output which is used to indicate if the signal level is insufficient or if a sensor is faulty. The sensor LED drive powers the optional monitor LEDs available on the remote sensors -output (LT) and power (LR). Technical Data Telco f WWW.TELCOSENSORS.COM REMOTE PHOTOELECTRIC SYST

 Open the catalog to page 1
PA 15 Series-2

PHOTOELECTRIC AMPLIFIER SERIES Environmental Data Available Types Note: Remote sensors to be ordered separately. Applicable Remote Sensors and Ranges Wiring Diagrams Alarm Supply Relay output 2 I REMOTE PHOTOELECTRIC SYSTEMS Telco /sensors

 Open the catalog to page 2
PA 15 Series-3

PHOTOELECTRIC AMPLIFIER SERIESDimensions and Descriptions PA 15 Power on indicator -Signal status indicator-Output indicator -Sensitivity adjustment -On delay adjustment -Off delay adjustment Long/short switch -Light/dark switch LT sensor test indicator LR sensor test indicator Power on indicator Signal status indicator Output indicator Sensitivity adjustment Long/short switch Light/dark switch LT sensor test indicator LR sensor test indicator «TILL (included with amplifier) Telco reserves the right to change specifications without notice. / sensors WWW.TELCOSENSORS.COM REMOTE PHOTOELECTRIC SYSTEMS...

 Open the catalog to page 3

All Telco Sensors catalogs and technical brochures

  1. SM 3000/CAT2

    4  Pages

  2. SG 2 Series

    4  Pages

  3. SP 2000

    6  Pages

  4. PA 01 Series

    2  Pages

  5. PA 10 Series

    2  Pages

  6. PA 11 Series

    2  Pages

  7. MPA 21 Series

    2  Pages

  8. MPA 41 Series

    3  Pages

  9. MPA 81 Series

    4  Pages

  10. PAB 10 Series

    3  Pages

  11. PAB 20 Series

    3  Pages

  12. PAB 30 Series

    3  Pages

  13. SG 11 Series

    5  Pages

  14. SGC 11 Series

    5  Pages

  15. SG 1 Series

    8  Pages

  16. SG 10 Series

    5  Pages

  17. SG 14 Series

    6  Pages

  18. OFS series

    3  Pages

  19. PP 00 series

    2  Pages

  20. SGC 1 series

    2  Pages

  21. SS 01 series

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.