Catalogs >
Telco Sensors >
PA 10 Series

PA 10 Series
2Pages

Catalog excerpts

PHOTOELECTRIC AMPLIFIER SERIES Description ■ Operation mode and max sensing range: Thru-beam: 0-60 m Diffuse proximity: 0-4 m ■ 230 V ac, 115 V ac, 24 V ac or 24 V dc supply voltage ■ Manual sensitivity adjustment ■ 1 relay or 1 transistor output ■ Switch selectable light or dark function ■ Switch selectable long or short range ■ Power and output indicators ■ 11-pole DIN socket connection The PA 10 is a 1-channel photoelectric amplifier. The PA 10 A is to be used in conjunction with a remote transmitter LT and receiver LR from series 101, whilst the PA 10 B is intended for use with series 100, 110, and 120. This amplifier series offers manual sensitivity adjustment via an integral potentiometer located on the front panel of the amplifier. Output can be selected from either a relay or an NPN/PNP transistor output. Light or dark function and long or short range are switch selectable. Technical Data REMOTE PHOTOELECTRIC SYSTEMS I 1

Open the catalog to page 1

PHOTOELECTRIC AMPLIFIER SERIES Available Types Note: Remote sensors and 11-pole DIN socket to be ordered separately. Relay output Dimensions and Descriptions Power on indicator Sensitivity adjustment Long/short range Output indicator Light/dark switch Transistor output Telco reserves the right to change specifications without notice. 2 I REMOTE PHOTOELECTRIC SYSTEMS Telco /sensors

Open the catalog to page 2

PA 10 Series 2Pages

Catalog excerpts

All Telco Sensors catalogs and technical brochures

PA 10 Series
2Pages