Catalogs >
Telco Sensors >
PA 01 Series

PA 01 Series
2Pages

Catalog excerpts

PHOTOELECTRIC AMPLIFIER SERIES Description ■ Operation mode and max sensing range: Thru-beam: 0-45 m Diffuse proximity: 0-3,5 m ■ 230 V ac, 115 V ac or 24 V ac/dc supply voltage ■ Automatic and/or manual sensitivity adjustment ■ Sensor LED-drive ■ Adjustable on/off time delay ■ 1 relay or 1 transistor output ■ STF - Signal Tracking Feature ■ Switch selectable light or dark function ■ Switch selectable long or short range ■ Power, output and signal status indicators ■ Test input ■ 11-pole DIN socket connection The PA 01 is a 1-channel photoelectric amplifier, which is to be used in conjunction with a set of remote transmitter LT and receiver LR from the series 101, 100, 110 or 120. This amplifier series offers a choice between automatic and/or manual sensitivity adjustment with or without a 0-10 sec on/off time delay via integral potentiometers located on the front panel of the amplifier. Output can be selected from either a relay or an NPN/PNP transistor output. Light or dark function and long or short range are switch selectable. In automatic mode, set up is required. This is achieved by pressing the teach-in button located on the front panel. This unique feature ensures that the transmitting power level is adjusted according to the application, thus achieving optimal hysteresis and excess gain. Once set up, the system will automatically compensate for moderate misalignment and contamination during operation. In manual mode, the teach-in button allows for an overall manual system test by temporarily disabling the transmitter. The sensor LED drive powers the optional monitor LEDs available on the remote sensors - output (LT) and power (LR). The feature STF allows up to 3 identical systems to operate within a close distance of each other without optical cross talk as each system automatically maintains different transmitter frequencies. Technical Data Telco f WWW.TELCOSENSORS.COM REMOTE PHOTOELECTRIC SYST

Open the catalog to page 1

PHOTOELECTRIC AMPLIFIER SERIES Available Types Note: Remote sensors and 11-pole DIN socket to be ordered separately. Signal status indicator -Output indicator - Signal status indicator Output indicator Manual switch and sensitivity adjustment Signal status indicator Output indicator On/Off delay adjustment Manual switch and sensitivity adjustment Telco reserves the right to change specifications without notice. 2 I REMOTE PHOTOELECTRIC SYSTEMS Telco /sensors

Open the catalog to page 2

PA 01 Series 2Pages

Catalog excerpts

All Telco Sensors catalogs and technical brochures

PA 01 Series
2Pages