Spectrum Analyzer H600 / SA2600 Series
Spectrum Analyzer H600 / SA2600 Series
- Scan: Utilizes DPX™ Live RF spectrum display technology for real-time signal analysis, processing up to 10,000 spectrums per second with a 100% Probability of Intercept (POI) for signals as brief as 125 µs.
- Performance: Offers benchtop spectrum analyzer performance in a handheld unit with a spurious free dynamic range (SFDR) better than 70 dB and phase noise specifications guaranteed ≤ -95 dBc/Hz at 10 kHz offset.
- Sensitivity: Detects low-level signals with a displayed average noise level (DANL) of -153 dBm at 10 Hz RBW.
- Remote Monitoring: LAN interface for remote control and monitoring.
- Includes built-in classification for various signal types (WLAN, GSM, etc.) and allows for database editing and sharing.
- Exports I/Q data for further analysis in formats like CSV and MATLAB®.
- Features tools for signal hunting and mapping, including GPS integration for outdoor signal tracking and a Tap-and-Walk interface for indoor use.
- Rugged design with a backlit display and dual batteries for extended field use.
- Used in spectrum management, monitoring, interference detection, signal hunting, and homeland security.
- Frequency Range: 10 kHz to 6.2 GHz.
- Input Power: Maximum +20 dBm peak envelope power.
- IF Output: 140 MHz center frequency with a 24 MHz bandwidth.
- Timebase Accuracy: ±0.5 PPM with factory calibration, ±0.01 ppm with GPS correction.
- GPS Receiver: Provides position accuracy with updates every second.
- RBW Range: 10 Hz to 3 MHz manually, 10 Hz to 1 MHz automatically.
- Noise Level: -153 dBm to -145 dBm depending on frequency range.
- Phase Noise: ≤ -95 dBc/Hz at various offsets.
- Channel Power Measurement: Bandwidth range from 1 kHz to 20 MHz with specified accuracy levels.
- Occupied Bandwidth Measurement: Power inclusion range from 50-100%.
- DPX™ Spectrum Display: Processes up to 10,000 spectrums per second with a minimum signal duration of 125 µs for 100% POI.
- Trigger Modes: Includes single or continuous, with various event sources and types.
- IQ Acquisition Time: Varies with span and sample rate, ranging from 36 ms at 20 MHz to 149 sec at 5 kHz.
- AM and FM Demodulation: Minimum input signal level is -100 dBm, with various audio measurement bandwidths available.
- Signal Strength Indicator: Minimum input signal level is -120 dBm, with a typical update rate of 10 per second.
- Environmental: Operating temperature range is 0 °C to +50 °C, with non-operating range from -40 °C to +60 °C.
- EMC Compliance: Complies with EN61326 standards and FCC regulations.
- Safety Compliance: Meets ANSI/UL610101 and other international safety standards.
- Physical Dimensions: Height: 25.5 cm, Width: 33 cm, Depth: 12.5 cm, Weight: 5.56 kg.
- Display: 10.4-inch transflective LCD with 640x480 resolution.
- Power: Battery life is approximately 5 hours in continuous spectrum mode.
Catalog excerpts
Arbitrary Waveform Generators - AWG5000 Series table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Arial", sans-serif; } .font2 { font:13.00pt "Arial", sans-serif; } .font3 { font:15.00pt "Arial", sans-serif; } .font4 { font:20.00pt "Arial", sans-serif; } .font5 { font:24.00pt "Times New Roman", serif; } Spectrum Analyzer H600 / SA2600 Series Data Sheet Classify Spectral Correlation Function (SCF) measurement provides fast signal-identification capability ■ Built-in classification capability for WLAN, GSM, W-CDMA, CDMA, ATSC signals makes quick and simple identification of legitimate signals Flexibility to edit, upgrade, and share signal databases and signal classification database using CSV file formats - Ability to export I/Q data into CSV, MATLAB®, and IQT format for additional post-analysis Locate ■ Rapid targeting of signals with field-proven signal hunting, mapping, and documentation tools Hunt outdoor signals with built-in GPS receiver by plotting measurements directly into GPS geo-referenced maps such as Pitney Bowes Mapinfo, Google Earth, Microsoft® MapPoint®, Bitmap, and many others Improved spectrum awareness with high-accuracy measurement synchronization and time stamping ■ Hunt in-building signals with a single-touch Tap-and-Walk-and-Tap interface Backlit display, viewable in direct sunlight, and extended battery performance with hot-swappable dual batteries ■ Rugged design per MIL-PRF-28800F Applications Spectrum Management Spectrum Monitoring and Surveillance Interference Detection and Troubleshooting Signal Hunting ■ Signal Identification ■ Signals Intelligence (SIGINT) Homeland Security The H600 and SA2600, including any of their associated technology, are subjectto the U.S. International Traffic in Arms Regulations (ITAR). Please check the U.S. Government's ITAR guidance before any export, re-export, resale, or other transfer: http://www.pmddtc.state.gov/. Features & Benefits Scan ■ Revolutionary DPXٙ Live RF spectrum display technology with DPX Spectrum Mask provides intuitive understanding of live RF signals using colors based on frequency of occurrence, processing up to 10,000 spectrums/sec with a 100% Probability of Intercept (POI) to capture pulsed signals, radar emissions, hopping signals, and any other intermittent signals with a minimum duration as brief as 125 ps > Benchtop spectrum analyzer performance in a ruggedized handheld battery-operated field unit offers better than 70 dB spurious free dynamic range (SFDR), guaranteed < -95 dBc/Hz at 10 kHz offset phase noise specificationsfrom10kHz to 6.2 GHz ■ Excellent sensitivity for detecting very low-level signals with -153 dBm DANL at 10 Hz RBW (equivalentto -163 dBm/Hz) such as RF bugs and unauthorized transmitters ■ Spectrum Correlation Function (SCF) finds "embedded" signals or interferers that hide under other wideband signals ■ LAN interface for remote control and unattended monitoring stations for spectrum awareness Tektronix
Open the catalog to page 1
Spectrum Analyzer - H600/SA2600 Series table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:11.00pt "Arial", sans-serif; } .font5 { font:6.00pt "Lucida Sans Unicode", sans-serif; } Data Sheet Interfrence Troubleshooting has Never Been so Easy The H600 and SA2600 Sries will quickly scan the RF environment, classify the known signals, and help you locate the unknown signals with their field-proven...
Open the catalog to page 2
Spectrum Analyzer - H600/SA2600 Series table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:8.00pt "Arial", sans-serif; } .font4 { font:10.00pt "Arial", sans-serif; } .font5 { font:11.00pt "Arial", sans-serif; } .font6 { font:6.00pt "Lucida Sans Unicode", sans-serif; } .font7 { font:5.00pt "Microsoft Sans Serif", sans-serif; } .font8 { font:4.00pt "Times New Roman", serif; } .font9 { font:5.00pt "Times New Roman", serif; } .font10 { font:6.00pt...
Open the catalog to page 3
Spectrum Analyzer - H600/SA2600 Series table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:11.00pt "Arial", sans-serif; } Data Sheet Characteristics General Performance Characteristics Characteristic Description RF Input Operating Frequency Range 10 kHz - 6.2 GHz Maximum Operating Input Level +20 dBm peak envelope power This is the maximum input level at which the instrument will meet its performance...
Open the catalog to page 4
Arbitrary Waveform Generators - AWG5000 Series table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:10.00pt "Arial", sans-serif; } Spectrum Analyzer H600 / SA2600 Series Characteristic Description Spectral Purity Displayed Average Noise Level, Preamp On -153 dBm, 10 MHz to 2 GHz, 10 Hz RBW -152 dBm, 2 GHz to4GHz, 10HzRBW -151 dBm, 4 to 5 GHz, 10 Hz RBW -145 dBm, 5 to 6.2 GHz, 10 Hz RBW Phase Noise (entire operating frequency < -95 dBc/Hzat 10 kHz offset range) < -95 dBc/Hz at 20 kHz...
Open the catalog to page 5
Arbitrary Waveform Generators - AWG5000 Series table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:10.00pt "Arial", sans-serif; } Data Sheet General Purpose RF Measurements Characteristics Characteristic Description General Purpose RF Channel Power Measurement Bandwidth Range 1 kHz - 20 MHz Accuracy 1.2 dB; +20 dBm to -60 dBm; 1 MHz to 3.2 GHz, preamp off, Ref Level > -35 dBm ã2.4 dB; -40dBm to -75dBm; 10 MHz to 3.2 GHz, preampon, Ref Level -35 dBm ã1.8 dB; +20 dBm to -50 dBm; 3.2 GHz to 6.2 GHz, preamp off, Ref Level > -35...
Open the catalog to page 6All Tektronix catalogs and technical brochures
5 Series B MSO67 Pages
5 Series MSO Low Profile40 Pages
4 Series B MSO55 Pages
3 Series MDO35 Pages
6 Series B MSO76 Pages
RSA306B29 Pages
TBS2000B Series18 Pages
TBS1000C Series15 Pages
5 Series40 Pages
6 Series41 Pages
FCA3000 and FCA3100 Series8 Pages
Archived catalogs
6 series mso71 Pages
5 Series MSO Low Profile39 Pages
MPEG Test Systems MTS400012 Pages
5 Series MSO73 Pages
5 Series MSO 202267 Pages
- Power supply unit
- DC power supply
- Automation software solution
- Management software solution
- Analysis software solution
- Automatic analyser
- Windows software
- Real-time software
- Cloud-based software
- Control software
- Single-output power supply
- Benchtop analyser
- Power supply for industrial applications
- Switching power supply
- Portable analyzer
- Industrial software
- Measurement software
- Interface software
- Tabletop power supply