Isolated Measurement Systems TIVP1, TIVP05, TIVP02 Datasheet

IsoVu probe technology delivers accurate differential measurements up to ±2500 V on reference voltages slewing ±60 kV at 100 V/ns or faster. With the IsoVu Generation 2 design, you get all the benefits of IsoVu technology at 1/5 of the size of first generation probes. With versatile MMCX connectors and an unmatched combination of bandwidth, dynamic range, and common mode rejection, IsoVu Gen 2 probes are setting new standards for isolated probe technology and enabling wide bandgap power designs using SiC and GaN. Benefits of IsoVu Probes IsoVu technology uses power-over-fiber and an optical analog...

Specifications All specifications are Typical and apply to all models unless noted otherwise. Overview Rise time Differential Input Voltage Range, Offset Range, Single-ended Impedance Use only the sensor tip cables listed. Differential input voltage range Offset range Single-ended input impedance Common Mode Rejection Ratio Approximately 20 dB lower in ±5 V Range, except at DC. Sensor tip cable Maximum Non-Destructive Differential Voltage Derated with frequency; refer to the Maximum differential input voltage vs. frequency derating graph in the Specifications section of the TIVP Series IsoVu...

Common mode voltage range Common mode input impedance (Typical) Input resistance Input capacitance Galvanically isolated through the fiber optic connection 2 DC Gain accuracy Differential DC gain accuracy <1.5% after self-cal; additional 4.5% within 4C of self-cal ±20 mV range (most sensitive) ±5 V range (widest range) Propagation delay 2 meter cable Laser certification CLASS I LASER PRODUCT This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Derated with frequency; refer to the Maximum differential input voltage vs....

Ordering information Models TIVP1 Tektronix IsoVu 1 GHz Isolated Probe with 2 m cable Tektronix IsoVu 500 MHz Isolated Probe with 2 m cable Tektronix IsoVu 200 MHz Isolated Probe with 2 m cable Tektronix IsoVu 1 GHz Isolated Probe with 10 m cable Tektronix IsoVu 500 MHz Isolated Probe with 10 m cable Tektronix IsoVu 200 MHz Isolated Probe with 10 m cable IsoVu carrying case for 2 m cable models; soft case (with foam insert) protects the TIVP and enforces the optical fiber minimum bend radius IsoVu carrying case for 10 m cable models; soft case (with foam insert) protects the TIVP and enforces...

Calibration Service 3 Years Calibration Service 5 Years Calibration Data Report Calibration Data Report 3 Years (with Opt. C3) Calibration Data Report 5 Years (with Opt. C5) Repair Service 3 Years (including warranty) Repair Service 5 Years (including warranty) Probes and accessories are not covered by the oscilloscope warranty and Service Offerings. Refer to the datasheet of each probe and accessory model for its unique warranty and calibration terms. Tektronix is ISO 14001:2015 and ISO 9001:2015 certified by DEKRA. Product Area Assessed: The planning, design/development and manufacture of electronic...