*mydirectindustry

Catalogs
Tektronix
Digital Serial Analyzer Sampling Oscilloscope

Digital Serial Analyzer Sampling Oscilloscope

Product catalog summary

Overview
The DSA8300 is a high-performance Equivalent Time Sampling Oscilloscope designed for analyzing communications signals, serial data networks, and serial data links. It is ideal for developing and testing multi-gigabit data transmission systems due to its superior signal fidelity and analysis capabilities.

Features & Benefits

Signal Capture: Features low time-base jitter (425 fs typical) and high vertical resolution (16-bit A/D).
Configurations: Supports up to 8 signals simultaneously with various optical and electrical modules.
Optical Modules: Supports data rates from 155 Mb/s to 100 Gb/s with bandwidths over 80 GHz.
Electrical Modules: Offers bandwidths exceeding 70 GHz with low-noise samplers and selectable bandwidths.

Analysis Capabilities

Includes over 120 automated measurements and automated mask testing.
Advanced jitter, noise, BER, and serial data link analysis through software applications like 80SJNB.
High test throughput with a sample acquisition rate up to 300 kS/s per channel.

Applications

Design and verification of telecom and datacom components.
Compliance testing for ITU/ANSI/IEEE/SONET/SDH standards.
Impedance characterization and network analysis for serial data applications.

Jitter, Noise, and BER Analysis

Supported by software solutions like 80SJARB and 80SJNB Essentials and Advanced, offering comprehensive analysis capabilities.
80SJARB provides basic jitter measurements, while 80SJNB Essentials and Advanced offer detailed analysis and additional features like channel emulation and equalization.

TDR Applications

The DSA8300 is a leading TDR measurement system with true-differential measurements up to 50 GHz bandwidth.
Modules like 80E10 and 80E08 provide high-fidelity measurements and support for multilane impedance and S-parameter characterization.

Conclusion
The DSA8300 offers unmatched measurement fidelity and versatility, making it a gold standard for high-bandwidth electrical and optical applications. Its modular architecture and comprehensive software applications ensure it meets current and future testing needs.

IConnect® Software Overview
The document describes the IConnect® Signal Integrity TDR and S-parameter Software, highlighting its cost-effectiveness and efficiency in S-parameter measurements for digital design and signal integrity analysis.

Specifications
IConnect® offers S-parameter measurements up to 50 GHz with a dynamic range of up to –70 dB. It supports SPICE and IBIS model generation and displays various signal integrity metrics such as eye diagram degradation and jitter.

Optical Test Solutions
The DSA8300 platform supports a wide range of optical modules for testing from 125 Mb/s to 100 Gb/s, covering various wavelengths and supporting clock recovery solutions.

Optical Sampling Modules
Several optical sampling modules (80C07B, 80C08C, 80C10B, etc.) are listed with specifications, including wavelength range, optical bandwidth, and mask test sensitivity.

Clock Recovery Solutions
Integrated and stand-alone clock recovery options for optical testing are detailed, including their variable rate ranges and sensitivity.

Measurement and Analysis Tools
The DSA8300 includes tools for optical testing, such as amplitude and timing measurements, compliance testing masks, and jitter and noise analysis. The 80SJNB applications provide advanced analysis capabilities.

Electrical Specifications
The DSA8300 supports up to 4 dual-channel electrical and 2 optical sampling modules, with a maximum of 8 channels. It features a vertical resolution of 16 bits and a maximum acquisition rate of 300 kS/s per channel in TDR mode.

Trigger System
Includes multiple trigger sources such as Clock Input/Prescale Trigger and TDR clock, supporting advanced triggering options with pattern sync and phase reference time base.

Math/Measurement System
Supports over 120 automated measurements, including amplitude, timing, and area measurements, with waveform processing capabilities and mask testing.

General Specifications
Operates within a temperature range of +10 to +40 °C and supports various power options. Includes a Windows 7 operating system, a 3 GHz Intel Core 2 Duo CPU, and a 160 GB hard disk drive.

Ordering Information
Lists various options and service packages available for the DSA8300, including calibration services and international power plug options.

Power Options
Lists power options for various regions including America, Switzerland, Japan, China, India, and Brazil.

Language Options
Manuals are available in English, Simple Chinese, Standard Chinese, and Russian.

Upgrade Kit Options
Includes options for advanced triggers, additional hard disk drives, and various software upgrades.

Optical and Electrical Modules
Describes various optical and electrical modules, each optimized for different frequency ranges and applications.

Phase Reference Module
The 82A04 Phase Reference Module provides a low-jitter time base for signal acquisition, supporting clocks up to >60 GHz.

Clock Recovery Modules/Instruments
Details modules like 80A05, CR125A, CR175A, and CR286A, each supporting different data rate ranges and applications.

Other Accessories
Includes extenders, filters, attenuators, adapters, power dividers, rackmount kits, and various probes.

Interconnect Cables
High-performance cables are recommended for minimizing measurement degradation.

Calibration Kits and Accessories
Precision calibration kits and other components are recommended for S-parameter measurements.

Contact Information
Provides contact details for Tektronix across various regions worldwide.

Additional Information
Tektronix offers a range of resources including application notes and technical briefs available on their website.

Catalog excerpts

Digital Serial Analyzer Sampling Oscilloscope-1

print job table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:8.00pt "Arial", sans-serif; } .font4 { font:13.00pt "Arial", sans-serif; } .font5 { font:15.00pt "Arial", sans-serif; } .font6 { font:20.00pt "Arial", sans-serif; } .font7 { font:23.00pt "Times New Roman", serif; } Digital Serial Analyzer Sampling Oscilloscope DSA8300 Data Sheet - High Optical Sensitivity and Low Noise as well as the Wide Dynamic Range of the Optical Sampling Modules allows Accurate Testing and Characterization of Short-reach to Long-haul Optical Communications Standards - Fully Calibrated Clock Recovery Solutions - No need to manually calibrate for data pick-offlosses - Calibrated Extinction Ratio Measurements ensure Repeatability of Extinction Ratio Measurements to <0.5 dB among Systems with Modules with this Factory Calibration Option Electrical Modules - Electrical Bandwidths to >70 GHz - Very Low-noise Electrical Samplers (280 uV at 20 GHz, 450 uV at 60 GHz, typical) - Selectable Bandwidths (with 80E07, 08, 09,10) allow the User to Trade-off Sampler Bandwidth and Noise for Optimal Data Acquisition Performance Remote Samplers (80E07,08,09,10) or Compact Sampling Extender Module Cables support Minimal Signal Degradation by allowing the Sampler to be Located in Close Proximity to the Device Under Test World's Highest-performance Integrated TDR (10 ps typical step rise time) supports Exceptional Impedance Discontinuity Characterization and High Dynamic Range for S-parameter Measurements to 50 GHz Analysis ■ Standard Analysis Capabilities Complete Suite of over 120 Automated Measurements for NRZ, RZ, and Pulse Signal Types Automated Mask Testing with over 80 Industry-standard Masks. New Masks can be Imported into the DSA8300 to support New Emerging Standards. In Addition, Users can Define their own Masks for Automated Mask Testing - Vertical and Horizontal Histograms for Statistical Analysis of Acquired Waveforms Vertical, Horizontal, and Waveform Cursors (with measurements) Jitter, Noise, BER, and Serial Data Link Analysis is provided through the 80SJNB Basic and Advanced Software Application Options Advanced TDR Analysis, S-parameter Measurements, Simulation Model Extraction, and Serial Link Simulation Capabilities are provided through the IConnect® Software Application Options High Test Throughput High Sample Acquisition Rate up to 300 kS/s per channel ■ Efficient Programmatic Interface (IEEE-488, Ethernet, or local processor access) enable High TestThroughput The DSA8300 is a state-of-the-art Equivalent Time Sampling Oscilloscope that provides the highest fidelity measurement and analysis capabilities for Communications Signal Analysis, Serial Data Network Analysis, and Serial Data Link Analysis applications. Features & Benefits Highest Fidelity Signal Capture ■ Very Low Time-base Jitter 425 fs Typical on up to 8 Simultaneously Acquired Channels <200 fs Typical on up to 6 Channels with 82A04 Phase Reference Module ■ Best Vertical Resolution -16 bit A/D - Electrical Resolution: <20 uV LSB (for 1 Vfull range) - Optical Resolution depends on the Dynamic Range of the Optical Module - Ranges from <20 nW for the 80C07B (1 mW full range) to <0.6 |jW for the 80C10B (30 mW full range) Flexible Configurations ■ With Today's Sampling Module Portfolio, the DSA8300 supports up to 8 Simultaneously Acquired Signals ■ A Wide Variety of Optical, Electrical, and Accessory Modules to support your Specific Testing Requirements ■ Optical Modules - Fully Integrated Optical Modules that support all Standard Optical Data Rates from 155 Mb/s to 100 Gb/s Certified Optical Reference Receivers Support Specified Requirements for Standards-mandated Compliance Testing - Optical Bandwidths to >80 GHz Tektronix

Open the catalog to page 1

Digital Serial Analyzer Sampling Oscilloscope-2

print job table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:13.00pt "Arial", sans-serif; } Data Sheet Ready Serial Data Network Analysis Passive Interconnect Test Applications ■ Design/Verification of Telecom and Datacom Components and Systems ■ Manufacturing/Testing for ITU/ANSI/IEEE/SONET/SDH Compliance ■ High-performance True-differential TDR Measurements ■ Impedance Characterization and...

Open the catalog to page 2

Digital Serial Analyzer Sampling Oscilloscope-3

print job table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:10.00pt "Arial", sans-serif; } .font3 { font:11.00pt "Arial", sans-serif; } Digital Serial Analyzer Sampling Oscilloscope DSA8300 Superior Performance with Extraordinary Versatility The DSA8300 Digital Serial Analyzer is the most versatile tool for developing and testing communications, computers, and consumer electronics which utilize multi-gigabit data transmission. It is used for optical and electrical transmitter characterization...

Open the catalog to page 3

Digital Serial Analyzer Sampling Oscilloscope-4

print job table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:9.00pt "Arial", sans-serif; } .font3 { font:10.00pt "Arial", sans-serif; } .font4 { font:11.00pt "Arial", sans-serif; } Data Sheet Jitter, Noise, BER, and Serial Data Link Analysis High-speed serial data link measurements and analysis are supported with three software solutions: 80SJARB, 80SJNB Essentials, and 80SJNB Advanced.*2 80SJARB (Option JARB) is a basic jitter measurement tool capable of measuring jitter on any...

Open the catalog to page 4

Digital Serial Analyzer Sampling Oscilloscope-5

Open the catalog to page 5

All Tektronix catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list