video corpo

AFG31000 Series
22Pages

{{requestButtons}}

Catalog excerpts

AFG31000 Series - 1

Arbitrary Function GeneratorsAFG31000 Series Datasheet The Tektronix AFG31000 Series is a high-performance AFG with built-in arbitrary waveform generation, real-time waveform monitoring, and the largest touchscreen on the market. Providing advanced waveform generation and programming capabilities, waveform verification, and a modern touch-screen interface, the new AFG31000 is sure to delight and simplify the job of every researcher and engineer. Key performance specifications • 1 or 2 channel models * Output amplitude range 1 mVP.P to 10 VP-P into 50 Q loads • Basic (AFG) mode: o 25 MHz, 50 MHz, 100 MHz, 150 MHz, or 250 MHz sine waveforms o 250 MSa/s, 1 GSa/s or 2 GSa/s sample rates 14-bit vertical resolution Built-in waveforms include sine, square, ramp, pulse, noise, and other frequently used waveforms Sweep, Burst, and Modulation modes (AM, FM, PM, FSK, and PWM) • Advanced (Sequence) mode: Continuous mode (optional Sequence, Triggered and Gated modes) 16 Mpts arbitrary waveform memory on each channel (128 Mpts optional) Up to 256 steps in sequence mode with loop, jump and wait events Variable sampling clock 1 pSa/s to 2 GSa/s Key features • Patented InstaView™ technology enables engineers to see the actual waveform at the Device Under Test (DUT) in real time, without the need of an oscilloscope and probe, eliminating the uncertainty caused by mismatched impedance • Sequencing option adds the ability to program long, complex waveforms with up to 256 steps • The 9-inch capacitive touch screen works like a smart phone and has short-cuts to frequently used settings • Built-in ArbBuilder lets you create and edit arbitrary waveforms on the instrument, eliminating the need to connect to a PC • Outputs are protected from over voltage and current to minimize potential instrument damage • Built-in Double Pulse Test application to generate voltage pulses with varying pulse widths onto the DUTs Applications Advanced research Clock and system synchronization Replication of real world signals Component and circuit characterization and validation Embedded circuit design and test General purpose signal generation Double pulse test

Open the catalog to page 1
AFG31000 Series - 2

Datasheet Basic and Advanced Modes The AFG31000 series is the industry’s first arbitrary function generator with full function Basic (AFG) and Advanced (Sequence) modes. In Basic mode, the AFG31000 generates traditional functions and arbitrary waveforms. The touchscreen and front-panel controls make it simple to set up. Basic mode lets you change frequency without the need to worry about waveform length and sample rate. This feature is useful in analog designs that characterize filter/amplifier frequency responses or in digital designs where clock rates change frequently. Advanced mode lets...

Open the catalog to page 2
AFG31000 Series - 3

AFG31000 Series InstaView™ technology shows the actual waveform at the DUT Most waveform generators assume they are driving a 50 Ω impedance. However, most devices under test do not have a 50 Ω impedance. This mismatch results in an inconsistency between the waveform as set on the AFG and the signal at the DUT. With InstaView turned on, the AFG31000 shows the waveform as observed at the DUT. A large touch screen and smart user interface With InstaView turned off, the AFG31000 works like a traditional function generator. Due to an impedance mismatch, the AFG display shows a different...

Open the catalog to page 3
AFG31000 Series - 4

Datasheet Built-in ArbBuilder tool makes creating and editing arbitrary waveforms easier than ever In the past, you needed a PC with waveform editing software to create or edit your arbitrary waveforms. The waveform would then need to be downloaded to the AFG using either a USB stick or a data cable connection. The process was time-consuming, especially when waveforms required frequent changes. ArbBuilder is a built-in application on the AFG31000 series that lets you create and edit your arbitrary waveforms directly on the generator. You can create arbitrary waveforms with the Equation...

Open the catalog to page 4
AFG31000 Series - 5

AFG31000 Series Double Pulse Test Reduce development time with ready-to-use, built-in applications The AFG31000 includes Double PulseTest, a downloadable plugin software application that enables double pulse applications for the power and semiconductor markets. The Double Pulse Test user interface provides touch-and-swipe or point-and-click control for generating at least two varying pulse widths. These pulses can be output to an isolated gate driver to trigger power devices such as MOSFETs or IGBTs. The Double Pulse Test on the AFG31000 offers the design and test engineer the ability to...

Open the catalog to page 5
AFG31000 Series - 6

Specifications All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise. Model overview Load impedance setting Selectable: 50 Q, 1 Q to 10.0 kQ, High Z (Adjusts displayed amplitude according to selected load impedance) 42 Vpk maximum to earth ground Short-circuit protection Signal outputs are robust against permanent shorts against floating ground Overcurrent protection When incoming current is greater than 250 mA, the output channels are protected with relays that disconnect the AFG from the device under test. Connection can be...

Open the catalog to page 6
AFG31000 Series - 7

General characteristics - Basic mode Basic (AFG) Run modes Continuous, Modulation, Sweep and Burst Standard waveforms Sine, Square, Pulse, Ramp, More (Noise, DC,Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine ) Arbitrary waveforms Sampling clock: 250 MSa/s, 1 GSa/s or 2 GSa/s (model and waveform length apply) Vertical resolution: 14 bits Waveform length: 2 to 131,072 points

Open the catalog to page 7
AFG31000 Series - 8

Spurious noise (1 VP.P), typical

Open the catalog to page 8
AFG31000 Series - 9

Pulse Frequency range Pulse width Pulse width resolution Pulse Duty Edge transition time Edge transition time resolution Lead delay range Lead delay resolution Overshoot, typical Jitter (RMS), typical 0.001% to 99.999% (limitations of pulse width apply) Resolution (into 50 Q) 1 mV or 4 digits Noise type Internal noise White Gaussian

Open the catalog to page 9
AFG31000 Series - 10

General characteristics - Other waveforms Basic mode Frequency range Arbitrary waveforms Frequency range Effective analog bandwidth (-3 dB) Waveform length Sample rate Vertical resolution Rise/fall time, typical AM modulation depth AM modulation resolution

Open the catalog to page 10

All Tektronix catalogs and technical brochures

  1. 6 Series B MSO

    80 Pages

  2. 5 Series B MSO

    73 Pages

  3. 5 Series MSO

    73 Pages

  4. 4 Series B MSO

    58 Pages

  5. 4 Series MSO

    59 Pages

  6. 6 series mso

    71 Pages

  7. 5 Series MSO

    67 Pages

  8. TBS1000C

    14 Pages

  9. 4 Series MSO

    46 Pages

  10. 3 Series MDO

    36 Pages