video corpo

5 Series MSO
67Pages

{{requestButtons}}

Catalog excerpts

5 Series MSO - 1

5 Series MSO Mixed Signal Oscilloscope Datasheet

Open the catalog to page 1
5 Series MSO - 2

Strength in numbers Input channels • • 4, 6, or 8 inputs Each FlexChannel provides: • • One analog signal that can be displayed as a waveform view, a spectral view, or both simultaneously Eight digital logic inputs with TLP058 logic probe Bandwidth (all analog channels) • Sample rate (all analog / digital channels) • • Record length (all analog / digital channels) • Optional serial bus trigger, decode, and analysis1 • Waveform capture rate • Vertical resolution • • Standard trigger types • Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup & Hold, Rise/Fall Time, Parallel Bus, Sequence,...

Open the catalog to page 2
5 Series MSO - 3

Remotely view and control the oscilloscope over a network connection through a standard web browser Standard probes • One 10 MΩ passive voltage probe with less than 4 pF capacitive loading per channel 3 years standard with optional Total Protection Plans With a remarkably innovative pinch-swipe-zoom touchscreen user interface, the industry's largest high-definition display, and 4, 6, or 8 FlexChannel® inputs that let you measure one analog or eight digital signals per channel, the 5 Series MSO is ready for today’s toughest challenges, and tomorrow’s too. It sets a new standard for...

Open the catalog to page 3
5 Series MSO - 4

Previous-generation MSOs required tradeoffs, with digital channels having lower sample rates or shorter record lengths than analog channels. The 5 Series MSO offers a new level of integration of digital channels. Digital channels share the same high sample rate (up to 6.25 GS/s), and long record length (up to 500 M points) as analog channels. The TLP058 provides eight high performance digital inputs. Connect as many TLP058 probes as you like, enabling up to a maximum of 64 digital channels. Channel 2 has a TLP058 Logic Probe connected to the eight inputs of a DAC. Notice the green and blue...

Open the catalog to page 4
5 Series MSO - 5

Beyond just analog and digital, FlexChannel inputs include Spectrum View. This Tektronix-patented technology enables you to simultaneously view both analog and spectral views of all your analog signals, with independent controls in each domain. For the first time ever, oscilloscope-based frequency-domain analysis is as easy as using a spectrum analyzer while retaining the ability to correlate frequency-domain activity with other time-domain phenomena. Unprecedented signal viewing capability The stunning 15.6" (396 mm) display in the 5 Series MSO is the largest display in the industry. ,...

Open the catalog to page 5
5 Series MSO - 6

Stacked display mode enables easy visibility of all waveforms while maintaining maximum ADC resolution on each input for the most accurate measurements. The 5 Series MSO offers a revolutionary new Stacked display mode. Historically, scopes have overlaid all waveforms in the same graticule, forcing difficult tradeoffs: • To make each waveform visible, you vertically scale and position each waveform so that they don't overlap. Each waveform uses a small percentage of the available ADC range, leading to less accurate measurements. For measurement accuracy, you vertically scale and position...

Open the catalog to page 6
5 Series MSO - 7

Viewing three analog channels, eight digital channels, a decoded serial bus waveform, decoded serial packet results table, four measurements, a measurement histogram, measurements results table with statistics and a search on serial bus events - simultaneously! Exceptionally easy-to-use user interface lets you focus on the task at hand additional waveform viewing area, the Results Bar can be dismissed and brought back at any time. The Settings Bar - key parameters and waveform management Waveform and scope operating parameters are displayed in a series of “badges” in the Settings Bar that...

Open the catalog to page 7
5 Series MSO - 8

Touch interaction finally done right Scopes have included touch screens for years, but the touch interface has been an afterthought. The 5 Series MSO 's 15.6" display includes a capacitive touchscreen and provides the industry's first oscilloscope user interface truly designed for touch. The touch interactions that you use with phones and tablets, and expect in a touch enabled device, are supported in the 5 Series MSO . • • • • Drag waveforms left/right or up/down to adjust horizontal and vertical position or to pan a zoomed view Pinch and expand to change scale or zoom in/out in either...

Open the catalog to page 8
5 Series MSO - 9

Setup, Auto-set and Quick-save functions are all available using dedicated front panel buttons. Windows or not - you choose The 5 Series MSO is the first oscilloscope to offer you the choice of whether to include a Microsoft Windows™ operating system. Opening an access panel on the bottom of the instrument reveals a connection for a solid state drive (SSD). When the SSD is not present, the instrument boots as a dedicated scope with no ability to run or install other programs. When the SSD is present, the instrument boots in an open Windows 10 configuration, so you can minimize the...

Open the catalog to page 9
5 Series MSO - 10

Triggering Discovering a device fault is only the first step. Next, you must capture the event of interest to identify root cause. The 5 Series MSO provides a complete set of advanced triggers, including: FastAcq's high waveform capture rate enables you to discover infrequent problems common in digital design. Industry leading vertical resolution The 5 Series MSO provides the performance to capture the signals of interest while minimizing the effects of unwanted noise when you need to capture high-amplitude signals while seeing smaller signal details. At the heart of the 5 Series MSO are...

Open the catalog to page 10
5 Series MSO - 11

Visual Trigger extends the instrument's triggering capabilities by scanning through all waveform acquisitions and comparing them to on-screen areas (geometric shapes). You can create an unlimited number of areas using the mouse or touchscreen, and a variety of shapes (triangles, rectangles, hexagons, or trapezoids) can be used to specify the desired trigger behavior. Once shapes are created, they can be edited interactively to create custom shapes and ideal trigger conditions. Once multiple areas are defined, a Boolean logic equation can be used to set complex trigger conditions using...

Open the catalog to page 11

All Tektronix catalogs and technical brochures

  1. 6 Series B MSO

    80 Pages

  2. 5 Series B MSO

    73 Pages

  3. 5 Series MSO

    73 Pages

  4. 4 Series B MSO

    58 Pages

  5. 4 Series MSO

    59 Pages

  6. 6 series mso

    71 Pages

  7. TBS1000C

    14 Pages

  8. 4 Series MSO

    46 Pages

  9. 3 Series MDO

    36 Pages