5 Series MSO Low Profile
39Pages

{{requestButtons}}

Catalog excerpts

5 Series MSO Low Profile - 1

5 Series MSO Low Profile MSO58LP Datasheet

Open the catalog to page 1
5 Series MSO Low Profile - 2

Input channels Advanced Jitter and Eye Diagram Analysis User-defined filtering Advanced Spectrum View RF vs. Time traces (magnitude, frequency, phase) Digital Power Management Mask/Limit Testing Advanced Power Measurements and Analysis 8 FlexChannel® inputs Each FlexChannel provides: • • One analog signal that can be displayed as a waveform view, a spectral view, or both simultaneously Eight digital logic inputs with TLP058 logic probe Bandwidth (all analog channels) • Sample rate (all analog / digital channels) • • 125 Mpoints (std.) 250, 500 Mpoints (optional) Waveform capture rate •...

Open the catalog to page 2
5 Series MSO Low Profile - 3

With a remarkable 8 input channels in a 2U high package and a 12-bit ADC, the 5 Series MSO Low Profile sets a new standard for performance in applications where extreme analog, spectrum, or digital channel density is required. Based on the highly successful 5 Series MSO The 5 Series MSO Low Profile is based on the 5 Series MSO benchtop platform. The benchtop 5 Series MSO has a remarkably innovative pinch-swipe-zoom touchscreen user interface, the industry's largest high-definition display, and 4, 6, or 8 FlexChannel® inputs that let you measure a single analog channel waveform, a spectral...

Open the catalog to page 3
5 Series MSO Low Profile - 4

Low-profile, high-density package saves space The 5 Series MSO Low Profile has 8 FlexChannel inputs plus an auxiliary trigger input in a space-saving 2U high package designed to fit into 19-inch wide racks. The instrument has side air vents so that instruments can be mounted in a rack directly on top of one another, saving even more space. The 5 Series MSO Low Profile comes standard with rack mount brackets installed, ready for mounting into a rack right out of the box. Multiple MSO58LP instruments installed in a rack, making efficient use of available space. An optional bench conversion...

Open the catalog to page 4
5 Series MSO Low Profile - 5

when you need to capture high-amplitude signals while seeing smaller signal details. At the heart of the 5 Series MSO Low Profile are 12-bit analog-to-digital convertors (ADCs) that provide 16 times the vertical resolution of traditional 8-bit ADCs. The following table shows the typical ENOB values for the 5 Series MSO Low Profile measured with High Res mode, 50 Ω, 10 MHz input with 90% full screen. Bandwidth A new High Res mode applies a hardware-based unique Finite Impulse Response (FIR) filter based on the selected sample rate. The FIR filter maintains the maximum bandwidth possible for...

Open the catalog to page 5
5 Series MSO Low Profile - 6

TekVPI Probe Interface Building a next-generation test rack The TekVPI® probe interface sets the standard for ease of use in probing. In addition to the secure, reliable connection that the interface provides, many TekVPI probes feature status indicators and controls, as well as a probe menu button right on the probe compensation box. The TekVPI interface enables direct attachment of current probes without requiring a separate power supply. TekVPI probes can be controlled remotely through USB or LAN, enabling more versatile solutions in ATE environments. The 5 Series MSO Low Profile...

Open the catalog to page 6
5 Series MSO Low Profile - 7

Upgrade Automated Test Equipment (ATE) systems quickly and smoothly Was your automation code written in the 1970s, 1980s, or 1990s? Anyone working closely with automated test systems knows that moving to a new model or platform can be painful. Modifying an existing codebase for a new product can be prohibitively expensive and complicated. Now there's a solution. All 5 and 6 Series Low Profile instruments include a Programmatic Interface (PI) Translator. When enabled, the PI Translator acts as an intermediate layer between your test application and the digitizer. The PI translator recognizes...

Open the catalog to page 7
5 Series MSO Low Profile - 8

Tile multiple e*Scope browser tabs on a monitor for viewing live data Two MSO58LP instruments being analyzed on PC running TekScope's 'Multi-Scope E*Scope is an easy method of viewing and controlling a 5 Series Low Profile instrument over a network connection in the same way that you do in-person with a monitor or keyboard. Simply type the instrument’s IP address into a browser to display the LXI landing page, then select the Instrument Control to access E*Scope. There are no drivers needed. It's all self-contained within the browser and you can control the instrument. It’s fast,...

Open the catalog to page 8
5 Series MSO Low Profile - 9

Filters can be created through the Math dialog. Once a filter is edited, it can be easily applied, saved, and recalled for use or modification later. Filter types supported on the MSO58LP include: • • Low pass High pass Band pass Band stop All pass Hilbert Differentiator Custom Filter response types supported on the MSO58LP include: • • • • • • Filter creation dialog showing selection for Filter Type, Filter Response, Cutoff Frequency, Filter Order, and a graphical representation of Magnitude/Phase, Impulse Response, and Step Response Filter designs can be saved, recalled, and applied once...

Open the catalog to page 9
5 Series MSO Low Profile - 10

The Low Profile family The 6 Series Low Profile Digitizer expands the performance of the 5 Series MSO Low Profile by adding twice the number of Tektronix TEK049 ASICS in the same 2U footprint. Now with 25 GS/s and up to 8 GHz on all channels. Low Profile users now have the choice of extreme high channel count or extreme performance in the same rack form factor. For more information on the capabilities of the 6 Series Low Profile Digitizer, please see the datasheet at www.tek.com/high-speeddigitizer/ Two 6 Series Low Profile Digitizers (left) and two 5 Series MSO Low Profile oscilloscopes...

Open the catalog to page 10
5 Series MSO Low Profile - 11

5 Series MSO Low Profile - The highest channel density and greatest performance in its class

Open the catalog to page 11
5 Series MSO Low Profile - 12

Specifications All specifications are guaranteed and apply to all models unless noted otherwise. Model overview Oscilloscope MSO58LP, MSO58LPGSA FlexChannel inputs Maximum analog channels Maximum digital channels (with optional logic probes) Bandwidth (calculated rise time) 1 GHz (400 ps) 50 Ω: ±1.0%, (±2.0% at ≤ 1 mV/div), ±0.5% of full scale, (±1.0% of full scale at 1 mV/Div and 500 μV/Div Settings) 1 MΩ: ±1.0%, (±2.0% at ≤ 1 mV/div), ±0.5% of full scale, (±1.0% of full scale at 1 mV/Div and 500 μV/Div Settings) 12 bits 8 bits @ 6.25 GS/s 12 bits @ 3.125 GS/s 13 bits @ 1.25 GS/s (High...

Open the catalog to page 12

All Tektronix catalogs and technical brochures

  1. 6 Series B MSO

    80 Pages

  2. 5 Series B MSO

    73 Pages

  3. 5 Series MSO

    73 Pages

  4. 4 Series B MSO

    58 Pages

  5. 4 Series MSO

    59 Pages

  6. 6 series mso

    71 Pages

  7. 5 Series MSO

    67 Pages

  8. TBS1000C

    14 Pages

  9. 4 Series MSO

    46 Pages

  10. 3 Series MDO

    36 Pages