Key performance specifications With a remarkably innovative pinch-swipe-zoom touchscreen user interface, the industry's largest high-definition display, and 4, 6, or 8 FlexChannel® inputs that let you measure one analog or eight digital signals per channel, the 5 Series MSO is ready for today’s toughest challenges, and tomorrow’s too. It sets a new standard for performance, analysis, and overall user experience. Input channels • Each FlexChannel provides: • One analog signal that can be displayed as a waveform view, a spectral view, or both simultaneously • Eight digital logic inputs with TLP058 logic probe Bandwidth (all analog channels) Sample rate (all analog / digital channels) Record length (all analog / digital channels) • 125, 250, 500 Mpoints, (optional and upgradable) Waveform capture rate Vertical resolution Standard trigger types • Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup & Hold, Rise/Fall Time, Parallel Bus, Sequence, Visual Trigger, Video (optional), RF vs. Time (optional) • Auxiliary Trigger <5 VRMS, 50Q, 250 MHz (>200 mVpp) (Edge Trigger only) Standard analysis • Cursors: Waveform, V Bars, H Bars, V&H Bars • Spectrum View: Frequency-domain analysis with independent controls for frequency and time domains • FastFrame™: Segmented memory acquisition mode with maximum trigger rate >5,000,000 waveforms per second • Plots: Time Trend, Histogram, Spectrum and Phase Noise • Math: Basic waveform arithmetic, FFT, and advanced equation editor • Search: Search on any trigger criteria • Jitter: TIE and Phase Noise Optional analysis (optional and upgradable) • Advanced Jitter and Eye Diagram Analysis • User-defined filtering • Advanced Spectrum View • RF vs. Time traces, triggers, Spectrograms, and IQ capture • Digital Power Management • Mask/Limit Testing • Inverters, Motors, and Drives • LVDS Debug and Analysis • Advanced Power Measurements and Analysis • Advanced Vector Signal Analysis (SignalVu-PC) Optional protocol trigger, decode, and analysis (optional and upgradable) I2C, SPI, eSPI, I3C, RS-232/422/485/UART, SPMI, SMBus, CAN, CAN FD, CAN XL, LIN, FlexRay, SENT, PSI5, CXPI, Automotive Ethernet, MIPI C-PHY, MIPI D-PHY, USB 2.0, eUSB2.0, Ethernet, EtherCAT, Audio, MIL-STD-1553, ARINC 429, Spacewire, 8B/10B, NRZ, Manchester, SVID, SDLC, 1-Wire,

Optional serial compliance test (optional and upgradable) • Ethernet, USB 2.0, Automotive Ethernet, Industrial Ethernet Arbitrary/Function Generator (optional and upgradable) • Waveform Types: Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/Fall, Sin(x)/x, Random Noise, Haversine, Cardiac Digital voltmeter (free with product registration) • 4-digit AC RMS, DC, and DC+AC RMS voltage measurements Trigger frequency counter (free with product registration) • High Definition (1,920 x 1,080) resolution Capacitive (multi-touch) touchscreen Never let a lack...

channels share the same high sample rate (up to 6.25 GS/s), and long record length (up to 500 M points) as analog channels. FlexChannel technology enables the ultimate in flexibility. Each input can be configured as a single analog or eight digital channels based on the type of probe you attach. Previous-generation MSOs required tradeoffs, with digital channels having lower sample rates or shorter record lengths than analog channels. The 5 Series MSO offers a new level of integration of digital channels. Digital The TLP058 provides eight high performance digital inputs. Connect as many TLP058...

nnnn nnr "nnn'nn'n'n" inn n n nnn n m nnnnnn n n n nnnn nn m in nn nnnn n n nnnnnnnn innn nnn i nnn'n nn n nnnn nn nnirmrinn min nnnn "nnn'nn "irn : n n n i i nnn n n n r Beyond just analog and digital, FlexChannel inputs include Spectrum View. This Tektronix-patented technology enables you to simultaneously view both analog and spectral views of all your analog signals, with independent controls in each domain. For the first time ever, oscilloscope-based frequency-domain analysis is as easy as using a spectrum analyzer while retaining the ability to correlate frequency-domain activity with other...

Stacked display mode enables easy visibility of all waveforms while maintaining maximum ADC resolution on each input for the most accurate measurements. The 5 Series MSO offers a revolutionary new Stacked display mode. Historically, scopes have overlaid all waveforms in the same graticule, forcing difficult tradeoffs: • To make each waveform visible, you vertically scale and position each waveform so that they don't overlap. Each waveform uses a small percentage of the available ADC range, leading to less accurate measurements. For measurement accuracy, you vertically scale and position each...

Viewing four analog channels, a decoded serial bus waveform, decoded serial packet results table, seven measurements, a measurement histogram, measurements results table with statistics, and a DVM - simultaneously! Exceptionally easy-to-use user interface lets you focus on the task at hand The Settings Bar - key parameters and waveform management Waveform and scope operating parameters are displayed in a series of “badges” in the Settings Bar that runs along the bottom of the display. The Settings Bar provides Immediate access for the most common waveform management tasks. With a single tap,...

Touch interaction finally done right Variable font size Oscilloscopes have included touch screens for years, but the touch interface has been an afterthought. The 5 Series MSO 15.6" display includes a capacitive touchscreen and provides the industry's first oscilloscope user interface truly designed for touch. Historically, oscilloscope user interfaces have been designed with fixed font sizes to optimize viewing of waveforms and readouts. This implementation is fine if all users have the same viewing preferences, but they don't. Users spend a significant amount of time staring at screens, and...