5 Series B MSO
73Pages

The largest display. The most channels. The greatest experience.

Strength in numbers Input channels • 4, 6, or 8 FlexChannel® inputs • Each FlexChannel provides: • One analog signal that can be displayed as a waveform view, a spectral view, or both simultaneously • Eight digital logic inputs with TLP058 logic probe Bandwidth (all analog channels) • 350 MHz, 500 MHz, 1 GHz, 2 GHz (upgradable) Sample rate (all analog / digital channels) • Real-time: 6.25 GS/s • Interpolated: 500 GS/s Record length (all analog / digital channels) • 62.5 Mpoints standard Waveform capture rate • >500,000 waveforms/s Vertical resolution • 12-bit ADC • Up to 16-bits in High Res...

Remotely view and control the oscilloscope over a network connection through a standard web browser Standard probes • One 10 MΩ passive voltage probe with less than 4 pF capacitive loading per channel With a remarkably innovative pinch-swipe-zoom touchscreen user interface, the industry's largest high-definition display, and 4, 6, or 8 FlexChannel® inputs that let you measure one analog or eight digital signals per channel, the 5 Series MSO is ready for today’s toughest challenges, and tomorrow’s too. It sets a new standard for performance, analysis, and overall user experience. Never let a...

Previous-generation MSOs required tradeoffs, with digital channels having lower sample rates or shorter record lengths than analog channels. The 5 Series MSO offers a new level of integration of digital channels. Digital channels share the same high sample rate (up to 6.25 GS/s), and long record length (up to 500 M points) as analog channels. The TLP058 provides eight high performance digital inputs. Connect as many TLP058 probes as you like, enabling up to a maximum of 64 digital channels. Channel 2 has a TLP058 Logic Probe connected to the eight inputs of a DAC. Notice the green and blue...

Beyond just analog and digital, FlexChannel inputs include Spectrum View. This Tektronix-patented technology enables you to simultaneously view both analog and spectral views of all your analog signals, with independent controls in each domain. For the first time ever, oscilloscope-based frequency-domain analysis is as easy as using a spectrum analyzer while retaining the ability to correlate frequency-domain activity with other time-domain phenomena. Unprecedented signal viewing capability The stunning 15.6" (396 mm) display in the 5 Series MSO is the largest display in the industry. ,...

Stacked display mode enables easy visibility of all waveforms while maintaining maximum ADC resolution on each input for the most accurate measurements. The 5 Series MSO offers a revolutionary new Stacked display mode. Historically, scopes have overlaid all waveforms in the same graticule, forcing difficult tradeoffs: • To make each waveform visible, you vertically scale and position each waveform so that they don't overlap. Each waveform uses a small percentage of the available ADC range, leading to less accurate measurements. For measurement accuracy, you vertically scale and position...

Waveform View Cursors Callout Measure Search Unit Interval Unit Interval Positive Pulse Width M': 499.9 ps_ Measurement Results Unit Interval Unit Interval Unit Interval Unit Interval Positive Pulse Width Positive Pulse Width Ch 4 Viewing four analog channels, a decoded serial bus waveform, decoded serial packet results table, seven measurements, a measurement histogram, measurements results table with statistics, and a DVM - simultaneously! EXceptionally easy-t0-use user interface lets you focus additional waveform viewing area, the Results Bar can be dismissed on the task at hand and...

Touch interaction finally done right Scopes have included touch screens for years, but the touch interface has been an afterthought. The 5 Series MSO 's 15.6" display includes a capacitive touchscreen and provides the industry's first oscilloscope user interface truly designed for touch. The touch interactions that you use with phones and tablets, and expect in a touch enabled device, are supported in the 5 Series MSO . • • • • Drag waveforms left/right or up/down to adjust horizontal and vertical position or to pan a zoomed view Pinch and expand to change scale or zoom in/out in either...

Setup, Auto-set and Quick-save functions are all available using dedicated front panel buttons. Windows or not - you choose The 5 Series MSO offers you the choice of whether to include a Microsoft Windows™ operating system. The 5 Series MSO comes with a standard removable SSD that contains a closed embedded operating system that will boot as a dedicated scope with no ability to run or install other programs. An optional SSD with Windows 10 operating system is available that will boot to an open Windows 10 configuration, so you can minimize the oscilloscope application and access a Windows...

Triggering Discovering a device fault is only the first step. Next, you must capture the event of interest to identify root cause. The 5 Series MSO provides a complete set of advanced triggers, including: FastAcq's high waveform capture rate enables you to discover infrequent problems common in digital design. Industry leading vertical resolution The 5 Series MSO provides the performance to capture the signals of interest while minimizing the effects of unwanted noise when you need to capture high-amplitude signals while seeing smaller signal details. At the heart of the 5 Series MSO are...

Visual Trigger extends the instrument's triggering capabilities by scanning through all waveform acquisitions and comparing them to on-screen areas (geometric shapes). You can create an unlimited number of areas using the mouse or touchscreen, and a variety of shapes (triangles, rectangles, hexagons, or trapezoids) can be used to specify the desired trigger behavior. Once shapes are created, they can be edited interactively to create custom shapes and ideal trigger conditions. Once multiple areas are defined, a Boolean logic equation can be used to set complex trigger conditions using...