FLOORSTANDING CABINET FRAME STRUCTURE EARTING CONTINUITY • Fully welded frame made from 1.5 mm material • Semi-closed height and width profiles • Fully closed and fixed sides • On the inner surface of the front door, the grounding screws • On the top and bottom are increasing the conductive surface to provide grounding continuity. IP PROTECTION AND NEMA CATEGORIES • For single doors; according to EN 60 529 resistance to water and dust in IP65 and NEMA 4 standards. • For double doors; according to EN 60 529 resistance to water and dust in IP54 and NEMA12 • Foam gaskets are used on all doors; such as front door, rear door, which are close the enclosure. Thanks to this gasket applied; without any application, full insulation is provided between -40°C and +100°C

SIZES and MODELS (ASSEMBLED) SOLID DOOR, MOUNTING PLATE : Enclosure body, gland plate: 1,50mm Galvanized steel + RAL 7035 Powder Coating Front door : 1,50mm sheet steel + RAL 7035 Powder coating Rear Panel : 1,20mm sheet steel + RAL 7035 Powder Coating Supply Includes : Enclosure body, front door, locks, hinges, gland plates, rear panel. Optional NOTE : Without Mounting Plate (see page 139), Plinth parts (see page 154) : Selected Plinth Parts and Mounting Plate can be mounted during the assembling. Without Plinth Without Plinth GLAZED DOOR, MOUNTING PLATE SOLID DOOR, without MOUNTING PLATE GLAZED...

SIZES and MODELS (ASSEMBLED) SIZES and MODELS (ASSEMBLED) SOLID DOOR, MOUNTING PLATE SOLID DOOR, without MOUNTING PLATE Without Plinth Without Plinth ATTENTION : Mounting plate thickness for double door enclosures is 3,00 mm. : Enclosure body, gland plate: 1,50mm Galvanized steel + RAL 7035 Powder Coating Front door : 1,50mm sheet steel + RAL 7035 Powder coating Rear Panel : 1,20mm sheet steel + RAL 7035 Powder Coating Supply Includes : Enclosure body, front door, locks, hinges, gland plates, rear panel. Optional : Without Mounting Plate (see page 141), Plinth parts (see page 154) : Selected...