Electronic sprayer kit P&S-T45-MXX NEBx01 IHM
9Pages

MICRONICE TECHNOLOGY P&S-T45 Plug&Spray Integrated tank Nebulization kit P&S-T45 Thank you for trusting Tekceleo and buying this Electronic sprayer system. Please follow the instructions below before using the Kit Plug&Spray-T45-MXX NEBx01 IHM

Electronic sprayer kit P&S-T45-MXX NEBx01 IHM Content Tripod H-T45 Electronic sprayer P&S-T45 Plug&Spray Integrated tank www.tekceleo.fr Phone : +33 (0)4 92 28 05 16 – contact@tekceleo.fr 1047, route des Dolines – Business Pole – 06560 Sophia Antipo

Electronic Control Unit Characteristics Characteristics Electronic sprayer Characteristics Supply voltage Current consumption/sprayer Cable length Any cable length change made by the client will impact the ECU operation 60 cm If you need a different cable length, please contact us Time response Electronic sprayer Spray head 04 Microns H-T45-M04 Spray head 08 Microns H-T45-M08 Spray head 12 Microns H-T45-M12 and HG-T45-M12 Flow rate : 1,2 ml/min +/- 0,2 ml/min Drop diameter : 4 μm +/- 1 μm Flow rate : 2 ml/min +/- 0,3 ml/min Drop diameter : 8 μm +/- 2 μm Flow rate : 3,5 ml/min +/- 0,5 ml/min...

Instructions to set up the P&S T45 Instructions: 1. Unscrew the cap located on the nebulizer's integrated tank 2. Fill in the integrated tank with the liquid you want to nebulize 3. Screw the cap and make sure it is hermetically sealed 4. Make sure the maximum tilt for the aerosol head is 45° ➢ For the electronic assembly please make sur to plug the 12V adapter to the 12Vin of the IHM P&S MXX at the very end : 1. Connect the IHM P&S MXX to the ECU NEBx01 ( BNC-BNC-12Vout-12V) 2. Connect the H-T45 electronic sprayer to the ECU NEBx01 via the mini XLR connector 3. Connect the IHM P&S MXX to...

ON/OFF and Flow Rate Control via BNC Connector N.B: The default State of BNC connector is always at 3.3V / the functions below are insured when the 12VDC power supply is connected On/Off + Flow Rate Control (PWM) : ➢ The default State of BNC connector is at 3.3V. ➢ By Default without input from BNC: electronic sprayer is ON. ➢ 100% Duty Cycle : electronic sprayer ON ( Frequency: 150 Hz). ➢ 0% Duty Cycle : electronic sprayer OFF ( Frequency: 150 Hz). ➢ From 0% to 100% Duty Cycle: Linear Electronic sprayer Flow Rate Variation. Function Electronic sprayer ON/OFF Flow Rate Control Any voltage >...

ECU NEBx01 MXX and Electronic sprayer Dimensions Step Files available upon request P&S-T45 Plug&Spray Integrated tank www.tekceleo.fr Phone : +33 (0)4 92 28 05 16 – contact@tekceleo.fr 1047, route des Dolines – Business Pole – 06560 Sophia Anti

Integrated tank specifications Please make sure not to fille more than 10ml of liquid in the tank . This might lead to dripping P&S-T45 Plug&Spray Integrated tank www.tekceleo.fr Phone : +33 (0)4 92 28 05 16 – contact@tekceleo.fr 1047, route des Dolines – Business Pole – 06560 Sophia Antipo

Maintenance and cleaning of the electronic sprayer ➢After each use, purge the electronic sprayer from initially used liquid and nebulize a saline solution NaCl 0,9% for 1 minute. ➢If the electronic sprayer is completely clogged, nebulize saline solution NaCl 0,9% mixed with white vinegar during a short period of time (about 1 min). ➢Ratio of saline solution NaCl 0,9% to vinegar= 100:1 Please make sure not to clean the membrane manually. If there is any problem with the flow rate, please follow the cleaning guide above. P&S-T45 Plug&Spray Integrated tank www.tekceleo.fr Phone : +33 (0)4 92...

For more information Please visit our website P&S-T45 Plug&Spray Integrated tank www.tekceleo.fr Phone : +33 (0)4 92 28 05 16 – contact@tekceleo.fr 1047, route des Dolines – Business Pole – 06560 Sophia Antipo