WING-R EC & WING-G EC DESIGN AIR CURTAIN FOR VERTICAL INSTALLATION

WING-R EC DESIGN AIR CURTAIN steelcomposite design discharge nozzle patented, steplessly variable high-quality powder coated or with stainless steel housing intake grille with micro grille behind it WING-G EC DESIGN AIR CURTAIN WING-R EC with a curved design and WING-G EC with a straight design are particularly suitable for curved sliding doors, automatic linear sliding doors as well as for retrofitting to revolving doors. The timeless design and user-friendly technology will satisfy architects, planners, clients and operators in equal measure. WING-R EC and WING-G EC are the ideal solution wherever...

+ Made in Germany + ErP 2015 ready / EC fans + Patented, multi-adjustable Jetflow discharge nozzle with adaptive, asymmetrical nozzle cross-section (large throw distance, low noise, optimum shielding) + Certified by TÜV-Süd + Self-supporting steel/aluminium composite construction. Screws are not visible. + Invisible energy supply + Simple to install + Individual RAL colours available or as stainless steel version + Different heating media possible + Individual unit lengths up to 3000 mm EC fans The efficiency of the EC fans used by TEKADOOR is > 90% under partial load operation. This is 30–35%...

Heating connections – flow and return – for easy connection to the on-site heating system. Simple electrical connection of the power supply 230 V/50 Hz thanks to the internal connection box. - Connections: Either from below or above, invisible within the door air curtain. Exception: Electrical units with a heating capacity greater than 22.5 kW. Floor mounted vertical unit

Data cable connection/interface Jetflow discharge nozzle (WING-R) Standard connection options for the data cable and an optional solenoid valve or thermo-electric shut-off valve within the unit. Simple plug and play of the data cable. Jetflow discharge nozzle with adaptive, asymmetrical nozzle cross-section. The special design of this patented discharge nozzle permits stepless variation of the discharge angle combined with a longer guided, smooth air stream with optimum throw distance. Control: Input for the data cable to the control unit. Auxiliary: Output for parallel operation with other units....

DISCHARGE SIDE ACCESS SIDE Draufsicht Draufsicht Revisionsseite stehend LINKS Ausblasseite Ansaugseite Revisionsseite stehend LINKS Ansaugseite Ansaugseite INTAKE SIDE inspection panel inspection panel Draufsicht inspectionDraufsicht A stehend RECHTS Draufsicht panel stehend RECHTS Draufsicht inspection stehend LINKS panel inspection panel Technische Änderungen vorbehalten * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES Connection-ready door air curtainø 50visible installation as a floor mounted vertical unit, with a curved design. for IN Ambient air intake is fromconnectionon the room side....

ACCESS SIDE INTAKE SIDE REAR Connection-ready door air curtain for visible installation as a floor mounted vertical unit, with a straight design. Ambient air intake is from the side, on the room side.

STANDARD CIRCUIT DIAGRAM FOR LPHW interface (optional) Stufe MODE Standard supplied shielded datacable (20 m) 1:1 straight wired RJ 45 connentors! Magnetic valve (OPTIONAL) to input CONTROL next PCB weiss/white gelb/yellow Standard Anschlusskabel (20 m) mit RJ-45 Stecker zum Steuerteil (CONTROL) Adresse 1-9 Magnetventil (OPTIONAL) Mains switch and fuses 3 to be installed by third parties must comply to all applicable ruls and 230V/ 50Hz requirements! Room Termostat Adress Schalter 0 = MASTER 1 - 9 = SLAVE Technical changes reserved * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES GTM 2 EC Nr.:...

CIRCUIT DIAGRAM ELECT. HEAT EXCHANGER interface (optional) Room thermostat zum Steuerteil (CONTROL) Adresse 1-9 Adress switch 0 = MASTER 1 - 9 = SLAVE Adress Schalter 0 = MASTER 1 - 9 = SLAVE Technical changes reserved Datum 01.08.2014 Maßstab GTM 1 E EC control unit with optional ModBus interface 2 languages (German/English can be selected), menu-prompted electronic standard control for air curtains with energy-saving EC motors and electrical heating. Operation/navigation is performed with a central rotary multi-selector. Menu operation via 2.4" colour display with text and icon display for...

OPTIONAL ACCESSORIES Thermostatic straight-way valve Door contact solenoid switch Frost protection thermostat (Setting range + 25 °C to + 45 °C) limits the discharge temperature (constant supply air temperature limitation). Also available as a 3-way valve. In automatic mode switches on the door air curtain in the preselected stages – in conjunction with GTM 2 EC, GTM 3 EC and GTM 2 E EC. For monitoring LPHW heat exchangers exposed to the risk of frost. As soon as the temperature falls below +7 °C, the fans are switched off and an optional solenoid valve is opened.

Room thermostat Thermo-electric shut-off valve Prevents overheating or overcooling of the room/vestibule in automatic operation. Opens or closes the heating water circuit in the summer/winter setting of the control unit, to close the heating water circuit during summer operation or when the air curtain is not working (normally closed). Caution: If solenoid valves or thermoelectric shut-off valves are used, it is expressly recommended to install a frost protection thermostat (automatically actuated) and a strainer. 230 V / 50 Hz, normally closed. On-site installation in the heating flow. Actuation...

WING-R/G EC TECHNICAL DATA

TECHNICAL DATA Design based on: recommended operating point intake temperature tLE = +20 °C discharge temperature tLA = +34 °C throw distance = up to 2.50 m * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES 1. Rated operation based on operating point (see above), discharge temperature control recommended. 2. Measured at a lateral distance of 3 m. Sound pressure level may very depending on surrounding conditions. A well-balanced pressure ratio is one of the prerequisites for perfect function.