RONDELL EC RONDELL EC RONDELL EC RONDELL EC RONDELL EC FOR REVOLVING AND CURVED SLIDING DOORS INDIVIDUAL INNOVATIVE ENERGY-SAVING

at the side (left or right), optional also possible on the intake side industrially-galvanised sheet steel housing powder-coated on request RONDELL EC DESIGN AIR CURTAIN with connection flange support always in the radius of the revolving doors with discharge fins for optimum air distribution, powder coated with RAL colours Rondell EC is "The" door air curtain for revolving doors. The unit is delivered complete with a discharge duct and support, including discharge fins, in three installation variants. These variants can be installed on top of, integrated into or in front of the door. Special...

+ Made in Germany + ErP 2015 ready / EC fans + Certified by TÜV-Süd + Individual solutions / custom-made depending on the revolving door + Different heating media possible + Service-friendly thanks to filterless intake grille + Individual colours – standard RAL colours available + Low noise, optimum shielding can be removed completely, optionally from above or below. at the side, left or right The efficiency of the EC fans used by TEKADOOR is > 90% under partial load operation. This is 30–35% higher than for conventional AC fans. This does not just increase the efficiency, but also reduces the...

Heating connections – flow and return – for easy connection to the on-site heating system. (Internal thread dimensions depend on the model series) Simple electrical connection via connection box (voltage supply 230V/50 Hz at the side of the unit). Exception: Electrical units with a heating capacity greater than 22,5kW.

Data cable connection/interface Discharge duct Simple, standard plug and play connection of the data cable and an optional solenoid valve. Discharge duct with guide plates (corresponding to the number of fans installed) consisting of a support adapted to the radius of the revolving door and vertically arranged fixed fins. All surfaces of the parts visible from below are powder coated in standard RAL colours according to the customer's wishes. Control: Input for the data cable to the control unit. Auxiliary: Output for parallel operation with other units.

Rondell, Top mounted type AB For use on revolving doors: installed on top of the door system body. Mounting of the air curtain system with discharge duct on top of the doors; the recirculating air is sucked in through the front of the unit. The discharge support – adapted to the door's outer radius – with integrated fins, is situated in front of the door's fascia. An additional cover can be mounted in front of the discharge support for architectural reasons. Covers and surfaces of all the parts visible from below are powder coated in standard RAL colours according to the customer's wishes. Heating...

Revolving door We need the following principal data to design the door air curtain system: Important for the size of the unit are Drum diameter: Entrance width: Fascia height: Please name the responsible contact person with whom we can agree the design. Company: Telephone: TekadQDr Type of installation: □ Integrated (EB) □ Top mounted (AB) □ Front mounted (VB) For the calculation of the air volume Headroom/discharge height HT =mm Number of door leaves FZ = Passage angle =° Drum speed / min. dZ =rpm Standard 3 to 4 rotations/min For the configuration of the heater tA Reference outside...

Rondell, Top mounted type AB TOP VIEW Rondell, Integrated type EB 50 DZ TOP VIEWA - A D Connection-ready door air curtain system with intake at the front and discharge support fitted to the door radius. 50 DZ A-A D

DT Rondell, Front mounted type VB Basic unit / total length Supply air support design A (mm) = Length A-50 mm) = Width supply air support ( E (mm) = Height DT (mm) = Drum diameter 100 D (mm) = Depth DA (mm) = External duct diameter D DI T (mm) = Internal air duct diameter DZ (mm) = Max. depth supply air support HA (mm) = Fascia height HB (mm) = Cover height Connection-ready door air curtain system with intake at the front and discharge support fitted to the door radius. Unit to be installed in the suspended ceiling in front of the door.

OPTIONAL ACCESSORIES Flexible heating connections (Setting range from +25°C to +45°C) Limits the discharge temperature (constant supply air temperature limitation). Also available as a straight-way valve. Flexible heating connections with threaded connections for flow and return. GTM 3 EC control unit Standard display of the date, time and room temperature on a 2.4" colour display. Automatic operation with room sensor and timer possible. Length approx. 1 metre each Temperature dependent 5-stage speed control corresponding to the selected room temperature. Includes room sensor.

Cable temperature sensor Frost protection Solenoid valve thermostat For monitoring LPHW heat exchangers exposed to the risk of frost. As soon as the temperature falls below +7 °C, the fans are switched off and an optional solenoid valve is opened. Opens or closes the heating water circuit in the summer/ winter setting of the control unit, to close the heating water circuit during summer operation or when the air curtain is not working (normally closed). Room sensor for detecting the actual temperature combined with the GTM 3 EC and GTM 2 E EC control units. Cable sensor for detecting the actual...

STANDARD CIRCUIT DIAGRAM FOR LPHW interface (optional) Stufe MODE Magnetic valve (OPTIONAL) to input CONTROL next PCB Standard supplied shielded datacable (20 m) 1:1 straight wired RJ 45 connentors! zum Steuerteil (CONTROL) Adresse 1-9 Magnetventil (OPTIONAL) Standard Anschlusskabel (20 m) mit RJ-45 Stecker Adress switch 0 = MASTER 1 - 9 = SLAVE Pla Mains switch and fuses 3 to be installed by third parties must comply to all applicable ruls and 230V/ 50Hz requirements! Technical changes reserved * WE RESERVE Room Termostat Frost protection thermostat THE RIGHT TO MAKE TECHNICAL CHANGES Adress...