Hose reels electro-motor driven Series STKi2Mo, available in alternating and direct current models suitable for hoses ½, ¾ and 1“ A large range of types is available for almust every area of application . Description: The series STKi2Mo is a very robust and superbly designed electric-motor driven hose reel with the following characteristics: The base frame is made from folded sheet steel profiles guaranteeing highest stability. Materials: All sheet metal and swivel parts of the drum and the switch box consist of stainless steel 1.4301 (V2a). The drum has a virtually closed steel plate hub and runs in maintenance-free synthetic gliding bearing bushes. A hose adapter welded to the axle is provided for easy hose connection without buckling stress. The tried and tested WDTH system is used for the angular swivel. The following nominal widths are available: ½", ¾", 1". All angled swivels can be supplied in stainless steel material upon request. Driving and mode of operation: The driving is effected by a robust geared with a manual sliding coupling. The right or left handed rotation of the drum is possible by choosing between the two key buttons. Unrolling the hose is carried out on choice either motordriven or manually after decoupling of the motor by means of the sliding coupling. A radio control is available upon request, allowing a control of the motor from a distance up to 120 m. The hose reels can be operated with the following electrical supply: Alternating current 230 V / 50 Hz, single-phase. (If three-phase AC is available, we recommend using this motor type.) Alternating current 400 V / 50 Hz, three-phase (three-phase current) Direct current 12 V DC in connection with a power inverter. Direct current 24 V DC in connection with a power inverter. Mounting Possibilities: The hose reel can be mounted hanging on the wall or ceiling or standing. Special consoles are not necessary. Areas of application and flow suitabilities: Stationary - in hand craft and industry. Mobile – mounted onto vehicles, working on construction sites, in community areas as well as in the service section. Flow suitability’s/some examples: water or water with detergents, air, oil and greases. Technical data see next page! Available types see next page. Technical data STKi2, alternating current, 230V AC 24

Gewicht Aufroll- Schlauch Max Max. bare -Ø Tempe Druck Schlauch -ratur -längen Gewinde [ Zoll ] WDTH10/Al = 300 bar. ** Normally the swivels are equipped with seals for temperatures up 100°C. A temperature up to 180°C can be achieved by using heat resisting sealing kits. Additional product code for 3/8“+ ½“: M1071001201, for ¾“+ 1“: M10710012 Motor- and driving data: Voltage Current Motor Capacity Turning moment Rotational speed of the drum Method of protection Weight, Motor unit

Product code DC [ V ] 12 0,22 24 0,22 The prices are valid without hoses, without packaging, ex works. Product Code Radio Control Transmitter E10720117 Receiver E10720117-1 The prices are valid without hoses, without packaging, ex works.