Hose reels Type STG with automatic spring return. The 1-Inch-rewinder – for large flow rates. Description: Base chassis made of warp resistant sheet steel profiles. The drum consists of two strongly profiled side plates and an almost closed sheet steel hub. The stress-free connection of the hose with little changing of the hose connection angle is made possible by the special angled connecting tube welded to the axle. Choice of material: Steel, powder coated . Alternative: special steel 1.4301. Reel Bearing specifications: Synthetic gliding bearing, maintenancefree, chemical resistant, entirely resistant against moisture and dirt. Motive Spring: High quality texture and spring band steel for maximum service life. Tension Release: The hose can be stopped at 8 positions per each rotation. A short pull of the hose releases the locking device. Areas of application: Water, water with chemical cleaning substances, air, oils and greases. Inflow Window of the hose: According to the requirements of installation it can be mounted in two different positions. (Picture 1 + 2). The guide rolls are made of durable polyamide. For available types, technical details, measurements and prices see next page!

Dimensioned drawing Hose reel Type STG Technical details and price list Hose reel Type STG The prices are ex works Type Product Code material/ surface Steel, coated with KTL+ powder Natural stainless steel Steel, coated with KTL+ powder. Natural stainless steel *** Enrollable length of hose in [m] with outer hose diameter of 35 mm max operating pressure 100 bar max operating temperature 100°C Consoles The following consoles from our standard programme fit our hose reels Type STG: See also catalogue pages 28 to 30! 1. Swinging Wall Consoles : Type SKW40/2V for powder coated hose reels. Type SKW40/2e...