Model 110A
2Pages

{{requestButtons}}

Catalog excerpts

Model 110A - 1

Model 110A Model 110A ELECTRICAL SAFETY TESTERS Safer by Design • MΩ current limiting resistor 1 in each probe. • Factory tested at 2500 V Originally developed for Dow Chemical, the safety benefits of the 110A are being enjoyed by E.I. du Pont, Eastman Chemical, Amoco Oil, Exxon, Lockheed-Martin and many more. The 110A is easy-to-use with gloves on; it is a cost effective replacement for less safe solenoid testers, analog meters and DMMs alike; and it has a proven field track record. • Permanently attached silicone insulated leads • Automatically detects AC or DC voltage The TEGAM 110A, (each factory-tested at 2500 V), has also been independently verified to withstand 5000 VAC for a full minute without effect. • esigned specifically to D enhance the safety of electricians in industrial environments. The Tegam Model 110A Safety Voltmeter is the only single switch, single range digital voltmeter that automatically tests for AC & DC volts to 1000 V and is factory-tested at 2500 V. The key to providing this level of safety is the 1 MΩ resistors found in each probe. These resistors limit the current flow through the 110A, thereby eliminating the hazard. Results... no arc or flash possible at point-of-contact or internally should a fault occur. No other voltmeter compares. Specifications Accuracy Input Resistance Overload Test Environmental Operating Limits Display in LCD, 3 1/2 digits, annunciators for 0.5 VAC, VDC, OL, polarity, and low battery Size 1 year materials and labor Prices and specifications subject to change without notice. 110A-909-01 Rev. D

Open the catalog to page 1
Model 110A - 2

Model 110A VOLTMETER ACCESSORIES Leather Utility Belt Carrying Case The 1104 case protects your voltmeter and probes from broken displays, and other damages that can occur. This case has a 2 inch belt loop. It is long lasting, super durable, and is made from top-grain cowhide with riveted seams. 1104 Utility Belt Carrying Case ORDERING INFORMATION : MODEL 1104 Cordura Nylon Lineman’s Carrying Case The 1204A case protects your voltmeter and saves you time because the meter can stay in the case during use. The 1204A features a window to access the ON/OFF switch, a retainer that holds the...

Open the catalog to page 2

All TEGAM catalogs and technical brochures

  1. R1L-E2A

    2 Pages

  2. Model 720A

    4 Pages

  3. THERMOMETRY

    3 Pages

  4. 1740/GPIB

    5 Pages

  5. Model 2348

    2 Pages

  6. R1M-A

    2 Pages

  7. R1L-D1

    2 Pages

  8. 1830A

    2 Pages

  9. RDP-20C

    1 Pages

  10. Model 945A

    3 Pages