SNV & SNU - High peak power UV Microchip series
7Pages

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION SNV/U High Performances UV Microchip Series 355 nm and 266 nm Repetition rate up to 30 kHz Ultrashort pulses down to 550 ps Multi-kW peak power Excellent beam quality Efficient, air-cooled Sealed package, extremely long life For generating high peak power ultraviolet pulses of a few hundred picoseconds, microchip lasers are economical, compact, and reliable. Micro-joule UV pulses are generated by harmonic conversion of the IR passively Q-switched Nd:YAG engine. Microchips are also easy to operate and service ; controllers can be used with every laser head model and swapped within minutes while conserving constant performances. The SNV and SNU series are designed for high average power, delivering multi-kW peak power at repetition rates up to 30 kHz. •APPLICATIONS — • Semiconductor inspection • Laser-induced fluorescence (LIF) • Micro dissection • Organic compound marking and micromachining • Biohazard detection • Time resolved fluorescence • Laser Induced Breakdown Spectroscopy (LIBS) All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION Repetition Rate Pulse duration (FWHM) (1) Output energy Peak Power Long term (6 hrs) power stability(3) Beam profile Short term (1min) power stability (3) Full angle divergence Horizontal@1/e² Vertical@1/e² Package 180x55x36mm 186x60x36mm 186x60x36mm 186x60x36mm 180x55x36mm 210x60x36mm dimensions Package weight Options (table p3) Options included NOTES — (1) Measured with 1Ghz photodiode and 1GHz/10GS/s oscilloscope. (2) Measurement performed with an OPHIR thermal power sensor (OPHIR 3A-FS-SH) (3) For temperature variation < ± 3°C and <...

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •COMPLEMENTARY INFORMATION & OPTIONS — Environment Parameters Operating Temperature Range Maximum Laser Head Baseplate Temperature Maximum Power Consumption Laser Head Thermal Dissipation Storage Temperature Shock of 11ms according to IEC 68-2-27, non operating Vibration 5Hz to 500Hz sinusoïdal according to IEC 68-2-6 Laser classification according to IEC 60825-1:2007 CDRH Yes, if used with a -DR1 controller Options Collimation (C) Synchronization output (S) With collimated beam TTL compatible output signal for synchronization/monitoring...

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •CDRH LASER HEAD MECHANICAL DRAWINGS: SNV-05P-100 — All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •CDRH LASER HEAD MECHANICAL DRAWINGS: SNV-20F-100, SNV-40P-100 & SNV-60P-100 — All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •CDRH LASER HEAD MECHANICAL DRAWINGS: SNU-02P-100 — All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •CDRH LASER HEAD MECHANICAL DRAWINGS: SNU-20F-100 — All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18