SNP High Performances IR Microchip Series
5Pages

{{requestButtons}}

Catalog excerpts

SNP High Performances IR Microchip Series - 1

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION SNP High Performances IR Microchip Series •KEY FEATURES — • Repetition rate up to 130 kHz • Ultrashort pulses down to 600 ps • Multi-kW peak power • Excellent beam quality – TEM00, M²<1.2 • Efficient, air-cooled • Sealed package, extremely long life For generating high peak power IR pulses of a few hundred picoseconds, microchip lasers are economical, compact, and reliable. Sub-nanosecond 1064nm pulses are indeed directly generated from the diode pumped passively Q-switched Nd:YAG microchip engine. Microchips are also easy to operate and service ; controllers can be used with every laser head model and swapped within minutes while conserving constant performances. The SNP series are designed for high average power, either from pulse energies of 20 µJ at 1064nm, or from repetition rates up to 130 kHz. Material processing - Cost effective marking solutions - Graphitization Instrumentation - Ranging - Differential absorption LIDAR - Super-continuum generation -Distributed temperature sensing - Raman spectroscopy All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18 Biophotonics - Nanosurgery - Protein cross-linking

Open the catalog to page 1
SNP High Performances IR Microchip Series - 2

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION Short term (1min) power stability (3) Long term (6 hrs) power stability(3) Beam profile Repetition Rate Constant Pulse width range (FWHM) (1) Output power(2) Output energy Peak Power Full angle divergence Horizontal@1/ e² Vertical@1/e² M²(4) Package weight NOTES — (1) Measured with 1Ghz photodiode and 1GHz/10GS/s oscilloscope. (2) Measurement performed with an OPHIR thermal power sensor (OPHIR 3A-FS-SH) (3) For temperature variation < ± 3°C and < 3°C/hour, stability is measured with calorimeter - detector band [DC, 2Hz] (4) Mean average...

Open the catalog to page 2
SNP High Performances IR Microchip Series - 3

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •COMPLEMENTARY INFORMATION & OPTIONS — Environment Parameters Operating Temperature Range Maximum Laser Head Baseplate Temperature Maximum Power Consumption Laser Head Thermal Dissipation Storage Temperature Shock of 11ms according to IEC 68-2-27, non operating Vibration 5Hz to 500Hz sinusoïdal according to IEC 68-2-6 Certification Laser classification according to IEC 60825-1:2007 Yes, if used with a -DR1 controller Options Multimode fibering (M) Contact factory for availability Single mode fibering (F) Contact factory for availability...

Open the catalog to page 3
SNP High Performances IR Microchip Series - 4

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18 www.teemphotonics.com Texte

Open the catalog to page 4
SNP High Performances IR Microchip Series - 5

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •CDRH LASER HEAD MECHANICAL DRAWINGS: SNP-08E-100 — All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18 www.teemphotonics.com Texte

Open the catalog to page 5

All TEEM PHOTONICS catalogs and technical brochures

  1. WAFT Series

    3 Pages

Archived catalogs