Picosecond Fiber Amplified Microchip PicoMega Series
5Pages

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION Picosecond Fiber Amplified Microchip PicoMega Series •KEY FEATURES — • 1064nm*, 532nm • Repetition rate up to 150 kHz • Ultrashort pulses down to 120 ps • Excellent beam quality – TEM00, M²<1.3 • Efficient, air-cooled, very compact *Refer to Factory for Detailed Performance Using the same platform as the PicoOne, the PicoMega Series brings passive Q-switching to a new realm. It generates ultra short pulses, down to 120ps of duration at repetition rates reaching 150kHz. From Lidar to high throughput processing in applications where ultra short pulse width is a “must”, the PicoMega laser has a low cost of ownership compared to more complex picosecond lasers. It can be used as a seeder in applications where still higher power is needed. Material processing Seeder for high power amplification Preliminary Specifications All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •TECHNICAL SPECIFICATIONS • Preliminary information Preliminary specs ANG-150P-000 Wavelength Repetition Rate* Constant Pulse width range (FWHM) Output power Output Peak Power Short term(10min) power stability(2) Long term (6 hrs) power stability(2) Beam profile Full angle divergence @1/e² Horizontal Vertical Polarization Option (described on page 3) *The repetition rate is fixed and factory-set at a value in this specified range. It is possible to target a fixed repetition rate in a narrower range closer to 150kHz, or to 100kHz, upon...

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION •SUPPLEMENTAL INFORMATION & OPTIONS • Preliminary information — Environment Parameters Operating Base Plate Temperature Tolerance Maximum Power Consumption Storage Temperature Shock of 11ms according to IEC 68-2-27, non operating Vibration 5Hz to 500Hz sinusoïdal according to IEC 68-2-6 Certification Laser classification according to IEC 60825-1:2007 CDRH compliance Package Laser Head dimensions, LxWxH Laser Head weight ALC-05A-DP1 controller dimensions, LxWxH ALC-05A-DP1 controller weight See mechanical drawings on page 4 4.5 kgs See...

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION LASER HEAD MECHANICAL DRAWINGS — All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18

FOR YOUR APPLICATION, FIND YOUR PULSED LASER SOLUTION ALC-05A-DP1 CONTROLLER PRELIMINARY MECHANICAL DRAWINGS — All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. August 18