1. Catalogs
  2. TEEM PHOTONICS
  3. NEW DEVELOPMENTS

NEW DEVELOPMENTS
1 /1Page

NEW DEVELOPMENTS

NEW DEVELOPMENTS
1 /1Page

Catalog excerpts

NEW DEVELOPMENTS-1

2µm Microchip lasers: passively and actively Q-switched models OPTICAL PERFORMANCE RANGE: Wavelengths: fixed at 1.95µm or tunable from 1.94µm to 1.96µm Single longitudinal mode upon request Energy per pulse: up to 270µJ Pulse duration: 30ns…60ns Repetition rate: fixed or tunable up to 5kHz Picture of the 2µm PQS laser prototype Mid-IR tunable OPO source (Optical Parametric Oscillator) Microchip Laser Our Optical Parametric Oscillator source converts the input signal from a 2µm pump laser into tunable Mid-IR beam using a nonlinear crystal. We achieve broad LWIR tunability (7.5-13µm) based on Orientation-Patterned GaAs crystal. 2 µm The OPO source we offer is uniquely compact. Option: additional Optical Parametric Amplifier (OPA) stage for a much higher output power. Source developed in partnership with ONERA and Thales Research and Technology (project funded by DGA) Mid-IR 7.5 - 13 µm (or 3-5µm upon request) Non-linear crystal KEY FEATURES: Wavelengths tunability: 7.5 to 13µm or 3 to 5µm upon request Single longitudinal mode Real-time wavelength control with Spectrum Analyzer included Picture of the prototype of the Mid-IR OPO compact source (on the left) and its controller (on the right) Peak power: 5W; up to 100W with the OPA option Repetition rate: fixed at 300Hz or 1kHz Pulse duration: 30ns…50ns Compact source: ~297mm*210mm*80mm (~A4 footprint) MAIN APPLICATIONS Stand-off gas detection Multi-species gas analysis LIDAR applications etc. For any further information, please contact our sales team Email: [email protected] / Phone: +33 (0)4 76 04 05 06 Example: spectral signatures of Toxic Chemical Agents in the LWIR wa

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.