HNx High Peak Power Amplified Microchip Series
5Pages

{{requestButtons}}

Catalog excerpts

HNx High Peak Power Amplified Microchip Series - 1

For your application, find your pulsed laser solution HNx High Peak Power Amplified Microchip Series Key features 1064nm and 532nm Ultra-short pulses down to 550ps@50kHz Peak power over 100kW Excellent beam quality – TEM00, M²<1.1 Efficient, air-cooled Sealed package, extremely long life The PicoSpark™ series combines multi-watt output level with high repetition rate and exceptional pulse characteristics to provide the best price/quality ratio for micromachining application. Passively Q-Switched (PQS) microchip laser technology and fiber amplification are brought together, delivering pulses with hundreds of kilowatt peak power and hundreds of gigawatt per square centimeter power density in a sealed and air-cooled compact package. This Master Oscillator Fiber Amplifier (MOFA) architecture notably offers a full control over the pulse energy (or peak power) while leaving unchanged the pulse width and pulse shape. Applications Micromachining o Selective ablation of µm to nm scale layers o Edge isolation o Cutting from PCB to PCD with no heat effect Instrumentation o Laser Induced Breakdown Spectroscopy o Raman spectroscopy o Supercontinuum generation o Ranging o Differential absorption LIDAR Biophotonics o Dense tissue ablation o Tattoo removal o Micro-surgery All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. November 13 HNx series - Page 1 of 5 www.teemphotonics.com

Open the catalog to page 1
HNx High Peak Power Amplified Microchip Series - 2

For your application, find your pulsed laser solution Technical specifications: HNP-50F-100(6) Wavelength Repetition Rate Constant Pulse width range (FWHM) (1) Output power(2) Output energy Peak Power Short term(10min) power stability(3) Long term (6 hrs) power stability(3) Beam profile Beam diameter at output Full angle divergence @1/e² Horizontal Vertical M²(4) Beam ellipticity(5) Polarization Energy control function Gating function Options included Measured with 1Ghz photodiode and 1GHz/10GS/s oscilloscope. Measurement performed with an OPHIR thermal power sensor (OPHIR 3A-FS-SH) For...

Open the catalog to page 2
HNx High Peak Power Amplified Microchip Series - 3

For your application, find your pulsed laser solution Complementary information & options: Environment Parameters Operating Temperature Range Maximum Power Consumption Storage Temperature Shock of 11ms according to IEC 68-227, non operating Vibration 5Hz to 500Hz sinusoïdal according to IEC 68-2-6 Certification Laser classification according to IEC 60825-1:2007 CDRH compliance Package Laser Head dimensions, LxWxH(7) Laser Head weight Cable length between head and controller Controller dimensions, LxWxH Controller weight Options Synchronization output (S) TTL compatible output signal for...

Open the catalog to page 3
HNx High Peak Power Amplified Microchip Series - 4

For your application, find your pulsed laser solution CDRH Laser Head Mechanical Drawings All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. November 13 HNx series - Page 4 of 5 www.teemphotonics.com

Open the catalog to page 4
HNx High Peak Power Amplified Microchip Series - 5

For your application, find your pulsed laser solution CDRH Controller Mechanical Drawings All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be held liable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without any notice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem Photonics for details. November 13 HNx series - Page 5 of 5 www.teemphotonics.com

Open the catalog to page 5

All TEEM PHOTONICS catalogs and technical brochures

  1. WAFT Series

    3 Pages

Archived catalogs