TEDDINGTON APPLIANCE CONTROLS LTD LTATESA LATCHTAP 300ºF (150ºC) Max. working temperature Low profile construction Multi-pose positioning 40” WG (150 mbar) max. pressure 90,000 Btu/hr flow rate (1” pd with Natural Gas) CSA Approved Adjustable pilot rate Inlet, pilot and thermocouple connection at rear Outlet at the side to fit straight onto burner tray LTSTESA 001 Description The Latchtap gas control was originally developed for Gas Log applications, but its use does not stop there. The control can be used where a high ambient temperature is found and a high throughput is required. The safety system used in this control is a well proven thermoelectric system that gives a positive and fast shut down if the pilot flame is lost. The valve has manual operation from off to pilot only, for ignition, and then on to full on. A 9-volt latching solenoid is then operated to control the valve from full on to pilot only positions. The solenoid can be operated via a simple rocker switch or an off the shelf Ultrasonic remote kit. All of this makes it an ideal control system to use where mains power is not wanted in the fireplace. It can also be used to replace problematic millivolt systems. Ultra-sonic Remote Kit Manual Rocker Switch Standard Knob available High / Low version available Ignition switch on spindle Different spindle configurations Inlet / outlet and thermocouple connections to suit application Lead length and plug configuration to suit application OEM Branding available upon request *Above options will be priced separately

TEDDINGTON APPLIANCE CONTROLS LTD Model shown LTATESA 001 (All dimensions in mm unless shown otherwise) Connections Inlet Outlet 1 Pilot flow TEDDINGTON APPLIANCE CONTROLS LTD TEDDINGTON APPLIANCE Part of the TEDDINGTON GROUP Holmbush · St. Austell · Cornwall · United Kingdom · PL23 3HG Tel: +44 (0) 1726 74400 · Fax: +44 (0) 1726 67953 www.tedcon.com · [email protected]