DSO

DSO

DSO

Product catalog summary
Overview
The DSO Combined Temperature Switch & Sender is designed for use in engines, pumps, compressors, gearboxes, and industrial power plants. It is built to withstand harsh environments and is compatible with Deutsch DT 3-way connectors, exceeding IP67 standards.

Key Features
  • Matched to customer gauges with tamper-proof housing.
  • Available in various mounting threads and can withstand acceleration up to 4G.
  • Rugged construction suitable for tough applications.

Physical Description
The DSO is a compact, non-adjustable unit with a 24 A/F hex brass body. It features a thermistor for fast and accurate temperature response and uses a Deutsch DT 3-way connector for reliable electrical connections.

Operation
The device functions as both a temperature switch and sender. It can drive gauges or ECUs and operate alarms, initiate shutdowns, or activate cooling fans at predetermined temperatures.

Installation Considerations
  • Ensure sufficient clearance around the body and avoid exceeding maximum temperature for longevity.
  • Use genuine Deutsch DT connectors for accurate measurement and protection.

Technical Specifications
  • Set Temperature Tolerance: ±3°C Rising, ±4°C Falling.
  • Temperature Range: 0 - 125°C in 1°C steps.
  • Electrical Voltage: 24V (18V – 32V), Current Capacity: 0.75A Resistive.
  • Switch Life: 10,000 cycles, IP Rating: IP 69.
  • Body Material: Brass, Connector Material: GFN (Black).

Ordering Information
DSO temperature switches and senders are available with standard temperature set points of 40°C, 55°C, 105°C, 108°C, 110°C, and 112°C. Other temperatures are available for volume orders. The device includes options for normally open or closed switch modes and various resistance values for different temperature settings.

Contact Information
Teddington Appliance Controls Ltd, Holmbush, St. Austell, Cornwall, United Kingdom, PL23 3HG. Tel: +44 (0) 1726 74400, Fax: +44 (0) 1726 67953, Website: www.tedcon.com, Email: [email protected]
See more

Catalog excerpts

DSO-1

TEDDINGTON APPLIANCE CONTROLS LTD DSO COMBINED TEMPERATURE SWITCH & SENDER ? DT 3-Way Compatible Deutsch ? IP67 Exceeds ? to Customer Gauges Matched ? Proof Housing Tamper ?Choice of Mounting Threads Available Broad ? Withstands Acceleration to 4G ? Construction for Tough Applications Rugged Application DSO Temperature Switches and Senders are ideally suited for use on all types of engines, pumps, compressors, gearboxes, industrial power plant and other application where resistance to the elements is the primary consideration. Physical Description The DSO is a combined temperature switch and sender. The sender output drives gauges or ECU's. The switch can be arranged to operate an alarm, initiate a shutdown or cut in a cooling fan at a pre-determined operating temperature, preventing damage to your valuable plant machinery. The DSO consists of a single compact non-adjustable unit based on a 24 A/F hex brass body. This enables the Installation Considerations control to be fitted directly into the application. Check there is enough clearance around the flats of the The DSO provides fast, accurate temperature response body and ensure the maximum possible temperature is through a thermistor that is located in the tip of the phial not exceeded for a long service life. protruding from the main body of the unit. For accurate temperature measurement, reliable Reliable electrical connection, in the toughest of connection and Ingress Protection, it is essential that the conditions, is made using a Deutsch DT 3-way connector. DSO is matched to the application you are using and that IP67 IP 6K 9K rated, this connector is hot pressure washer resistant and is used by the military and leading off-road plant manufacturers. genuine Deutsch DT connectors are used.

 Open the catalog to page 1
DSO-2

TEDDINGTON APPLIANCE CONTROLS LTD Technical Specification Standard Features Outline Details ±3°C Rising. ±4°C Falling. 10°C Diff Nominal. Normally Open (O) or Normally Closed (C). Switch Mode Options Note: Connectors supplied orientated as shown Electrical Voltage Electrical Current Capacity Switch Life Environment Temperature Contact Type IP Rating Insulation Type Connector 24V 0.75A Resistive. 10 000 cycles. -40°C to 125°C. Silver-Plated. IP 69. Isolated Earth. Deutsch DT 3-way Compatible. Connector Material Body Material Tightening Torque Temperature Range Sender Tolerance Additional Ordering...

 Open the catalog to page 2

All Teddington Controls catalogs and technical brochures

  1. QW

    4  Pages

  2. DCA/B

    1  Page

  3. 38000

    2  Pages

  4. GM

    3  Pages

  5. DSS

    2  Pages

  6. DCA/A

    2  Pages

  7. LTSA

    2  Pages

  8. LTATESA

    2  Pages

  9. SOV

    2  Pages

  10. 52000

    2  Pages

  11. 51000

    2  Pages

  12. MSV

    2  Pages

  13. ATESA 203L

    2  Pages

  14. COMSA

    2  Pages

  15. TESA

    2  Pages

  16. GBR

    2  Pages

  17. FrostSentry

    2  Pages

  18. CombiSave

    2  Pages

  19. DST

    2  Pages

  20. 54000

    2  Pages

  21. FFD

    2  Pages

  22. KBB

    2  Pages

  23. TESA 2394

    2  Pages

  24. CSV

    2  Pages

  25. ATESA 105

    2  Pages

  26. 53000

    2  Pages

  27. KBB Adaptors

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.