TEDDINGTON APPLIANCE CONTROLS LTD ATESA 105 FLAME SAFETY CONTROL ? 250ºF (120ºC) Max. working temperature ? Multi-pose positioning ? (150 mbar) max. pressure 40” WG ?Btu/hr flow rate (1” pd with Natural 30,000 Gas) ? Off-High-Low operation with push to turn on ? Panel mounted ? CSA Approved for 1/2 PSI working pressure ? NG, LPG and Towns Gas Suited for Description This flame safety gas control has many applications in the market from Fire pits, Patio Heaters, small fires right up to Infra-Red Burners on BBQ's and Ranges. The safety system used in this control is a well proven thermoelectric system that gives a positive and fast shut down if the pilot flame is lost. It can also be used in conjunction with ODS pilots. The ATESA105A offers a compact gas control, with many variations already available. It offers low cost with quality and the reassurance that you get from all of Teddington Controls' products. ATESA 105AC

TEDDINGTON APPLIANCE CONTROLS LTD Model shown ATESA 105AC 1 10.5 REF 1/8"-27NPT 2 17.46 (11/16") Off 17.46 (11/16") 11.4 REF 1/8"-27NPT Ø 8.718.66(.343")(.341") 11/32-32 23.6(.93") (All dimensions in mm unless shown otherwise) Connections Outlet Pilot 1/4 x 18 NPT 1/4 x 18 NPT N/A Inlet ATESA 105/AC ATESA 105/U 1/4 x 18 NPT 1/4 x 18 NPT 1/8 x 27 NPT Magnet nut Position 1 (pilot) Position 2 (pilot) Low Flow Full Flow 1700 MIN l/hr AIR @28mbar 610 l/hr AIR @ 2.5mbar 11/32-32 NS (2 START) • • 124+/-10% l/hr AIR @28mbar M8x1-6H 220 l/hr AIR @ 2.5mbar 160 l/hr AIR @ 2.5mbar • 08/08 TEDDINGTON APPLIANCE...