Catalogs >
TECSYSTEM srl >
TPL 503 SYSTEM

TPL 503 SYSTEM
6Pages

Add to favorites

Catalog excerpts

FOR THE REMOTE CONTROL OF YOUR HERMETIC TRANSFORMER

Open the catalog to page 1

THE INNOVATIVE TPL 503 SYSTEM IS À TRUE LEAP QUALITY IN MONITORING THE HERMETIC OIL TRANSFORMERS. RS485 Modbus RTU connection for: Scada System, PLC and Gateway FOR THE REMOTE CONTROL OF YOUR HERMETIC TRANSFORMER TEC'.5i I ·-··· relays & ventilation 1T1:r1 =t:: E! Temperature protection Via Leonardo da Vinci, 54/56 - 20094 Corsico (Ml) Ph. 0248601011 - 024581861 (3 r.a.) - Fax 0248600783 info@tecsystem.it FROM THE LOCAL NElWORK... TO THE WORLD -Romania Spanish data center Tunisi! M your trusted distributor Egitto Arabia Saudita Sucen Yemen -Golf, Temperature protection

Open the catalog to page 2

TPL 503 SYSTEM: YOUR HERMETIC TRANSFORMER WILL BE NEVER ALONE! — Reliability, Maintenance, Efficiency: three foundamental concepts that must be the basis of any system, equipped with an access and data collection. It is in this perspective that TECSYSTEM continues to operate on its own temperature monitoring products for transformers, electric motors and thermally controlled environments, developping “smart” products,able to receive and transmit information: designed fora world 4.0! TPL 503 SYSTEM (control unit BB211 + sensor TPL 503) represents the innovation 4.0 for the protection of...

Open the catalog to page 3

Data transmission for remote control (Modbus RTU) with RS232 or RS485 output or ETH (in combination with CONVETH). Signaling of parameters and alarms via multicolored LEDs. Digital oil temperature reading with 1 °C accuracy and double alarm threshold. Thanks to the transparent structure the oil level is visible at 360 Signaling of oil loss or gas formation with double alarm threshold Temperature, pression and level measurement according to EN 50216-3 (ed. 2002)+/A2(ed. 2007). Fully compatible with traditional device mounting arrangements. Absence of mechanical moving parts that may jam or...

Open the catalog to page 4

TEMPERATURE, PRESSURE AND OIL LEVEL TO THE BB211 CONTROL UNIT. V The RS232 or RS485 or ETH digital output (in conjunction with the CONVETH) and the new data mapping make it interfaceable with systems remote acquisition, allowing the management of the “smart transformers” yf It receives information on the status of the transformer and supplies the TPL 503 V It controls the protection systems thanks to dedicated alarm contacts y/ The DIN rail mounting system and the small size allow its installation in the most varied Marshalling Boxes! The sensor TPL 503 can be connected, alternatively, to...

Open the catalog to page 5