Catalogs >
TECSYSTEM srl >
TG360 – Fan series TG

TG360 – Fan series TG
9Pages

Catalog excerpts

INSTRUCTION MANUAL operates with ISO9001 certified quality system TECSYSTEM S.r.l. 20094 Corsico (MI) Tel.: +39-024581861 Fax: +39-0248600783 ENGLISH “Translations of the original instructions

Open the catalog to page 1

First of all thank you for choosing and using TECSYSTEM product, we strongly suggest you to read carefully this instruction manual. It will allow you to understand how to use the system and take full advantage of all its features. WARNING! THIS MANUAL IS VALID AND COMPLETE ONLY FOR THE FANS MODE: TG180, TG360 AND TG500.

Open the catalog to page 2

SAFETY REGULATIONS WARNING: Carefully read the manual before using the fan. Keep these instructions for future reference. Do not touch /move fans while they are in operation: RISK INJURY. The product must be installed in a location with limited access to qualified technician. Any work on the appliance must be left to a qualified repair technician. Do not touch the motor or power cables: contact with a voltage of 230/120 Volts AC can be fatal. To reduce the risk of electric shock, do not disassemble or modify in any way the fan motor. Before connecting the device to make sure that all...

Open the catalog to page 3

MOUNTING DIMENSIONS (mm), MOUNTING HOLES AND CONNECTIONS TG180 Front view Rear view with mounting holes Motor side view Flapper orientation airflow Power Connection (Cable: Brown-Blue-YellowGreen 230Vac 50Hz.)

Open the catalog to page 5

DIMENSIONS (mm), MOUNTING HOLES AND CONNECTIONS TG360 Rear view with mounting holes Motor side view Flapper orientation airflow Front view Power Connection (Cable: Brown-Blue-YellowGreen 230Vac 50Hz.)

Open the catalog to page 6

MOUNTING NOTES Fix the fans using the holes on the back, do not change the mounting holes of the fan. During the handling of the fans avoid deforming the fins of the impeller. Never change the motor positioning. If the fan is mounted on board of a transformer the working position of the fan must comply with the safety distance, indicated in the manual of the transformer, on which you are installing the fan. The fan must be positioned in the horizontal plane, always make sure, through the help of a level, that the fan is positioned correctly. The maximum rate of vibration permitted is 60Hz....

Open the catalog to page 8

WARRANTY CONDITIONS The Product purchased is covered by the manufacturer's or seller's warranty at the terms and conditions set forth in the "Tecsystem s.r.l's General Conditions of Sale", available at www.tecsystem.it and / or in the purchase agreement. The warranty is considered valid only when the product is damaged by causes attributable to TECSYSTEM srl, such as manufacturing or components defects. The warranty is invalid if the Product proves to have been tampered with / modified, incorrectly connected, because of voltages outside the limits, non-compliance with the assembly and use...

Open the catalog to page 9