PREMIUM
1Pages

FICHE PREMIUM GB 01:Mise en page 1 BATTERY CHARGER 12 V/15 A - 12 /25 A - 24 V / 15 A 1 or 2 outputs Experts since 1985 in the conversion of electric energy, for powers ranging from 50 to 3000 watts, TECSUP offers small, lightweight and ready-to-use switch mode battery chargers. Conceived for a consistent charge rate, the PREMIUM is perfectly suitable for all the “custom embedded” applications (boats, motor homes, ambulances…) and sectors for which charging safely and correctly is essential (security, street signs, lighting…). Charge quality • Three-states charging curves: - BOOST / Fast charge: restores 80% of battery capacity in the shortest possible time. - ABSORPTION / Top up charge: brings the battery up to 100% capacity without causing excessive gassing or boiling. FACTORY PRESET TIME PERIOD FOR SAFETY - FLOATING / Maintenance charge: maintains the battery at its optimum operating voltage without causing gassing. The charger will make up for internal loss and drain present in every battery. • IUU charging curves for 2 different types of batteries : lead open, sealed (AGM, Gel). • Curve selection with an external jumper. Output (voltage / current) 90V à 260V with progressive de-rating below 190V Universal input voltage Full power - 20°C à +45°C Progressive de-rating from +45°C up to +70°C Working temperature (cut off point) Storage temperature Easy to use • Easy to install with connecting cables pre wired. • Horizontal or vertical installation. • The PREMIUM allows the battery to be connected and used constantly, while still offering a real BOOST (high voltage) charge over short period. The charger switches back to top-up mode automatically. Safety • Extruded aluminium housing and anodized. • Smart protection against water: air inlet located at the bottom, outlet at the back of the charger. • Protection index PI 23. • Electronic protection against : over voltage at input, charger output short-circuit, battery discharge in the events of mains failure. Ventilated specifications • Protected against accidental reverse • Variable speed fan. Fan speed is linked polarity of output by an external to the chargers temperature. automotive type fuse. • Fan reaches maximum RPM at +45°C. • CE conformity. • Virtually silent up to +30°C. - 2 years warranty. - Listening and proximity with clients. Solutions created & developed to measure Standard solutions, customizable & modular • Electromagnetic compatibiliy (E.M.C.): EN 50081-1, EN 50082-1, EN 55022 class B. • User safety: NF EN 60335-1 and EN 60335- 2-29 Frontal display • Orange (“charge”): Boost / Absorption. • Green (“100%”): Floating. • Red (“def”): Default condition Connexions • AC connexion via IEC socket or pre wired 3 pin AC plug (1.80m). • DC connexion via flyleads (1.80m) terminated with 8 mm dia. crimp terminal. - Knowledge of conditions of use. - Specific versions on request. Solutions dedicated to your sector of activity Predeveloped Solutions 7, avenue du Pré de Challes - PAE des Glaisins - 74940 Annecy-Le-Vieux - FRANCE Tel. : +33 (0)4 50 68 96 22 - Fax : +33 (0)4 50 68 96 34 - info@tecsup.fr - www.tecsup.fr TECSUP n° 80300038 C - Non contractual picture