BATTERY CHARGER Optimized performances • PFC > 98%. • Efficiency > 84%. • Usable with a wide range of power sources (mains, generator….). • Charging curves 3 or 5 states. • Constant voltage curves (power supply). • Output ripple < 50mVrms. • Extruded and anodised aluminium box. Safety • Electronic protection against input surges & short circuits on output. • Automatic electronic protection against polarity inversions (no fuse to change). • Ingress Protection standard : IP 20. • CE conformity. • Electromagnetic compatibility (EMC): EN 55022, class B. • User safety: EN 60335-1, EN 60335-2-29. Frontal display • A led indicates the mode of working of the charger: - Orange: “Boost” - Green: “Floating” - Red: “Battery default” - 2 year warranty. - Listening to and proximity with clients. - Knowledge of conditions of use. - Specific versions on request. Output (voltage / current) Input voltage Power Frequency DC output Charging curve (external rotary switch) Working temperature Fan Dimensions (mm) Weight Inlet connector Outlet connector ENGINEERING Solutions created & developed to measure CATALOGUE Standard solutions, customizable & modular APPLICATIONS Solutions dedicated to your sector of activity MODELS Predeveloped Solutions 32, route des Moulins - BP 116 - 74410 SAINT-JORIOZ - ANNECY - FRANCE Tel. : +33 (0)4 50 68 96 22 - Fax : +33 (0)4 50 68 96 34 - [email protected] - www.tecsup.fr Other versions available at request: 72V/10A ; 96V/7.5A From 55 up to 260 VAC (universal voltage) U > 200 VAC : 800 W U < 200 VAC : progressive power derating. 50 / 60 Hz. High frequency technology 1 16 pre-set charging curves in memory. Full power : –25°C to +50°C. Progressive derating from +50°C up to +70°C. Variable fan speed depending on temperature. 220 x 112 x 75. 1,5 Kg. Wire 3 x 0.75 (lenght 1.4 m) + overmoulded Schuko plug or IEC socket (wire n/i). Connector block 2 pts (6mm²) or wire 2x6² (length 1.9 m) - version 12 V / 50 A Options • Series connections, parallel connections (master/slave). • Specific algorithms for the lithium batteries. • Liaison RS 232 to PC. • Temperature compensation sensor. • Remote control. • Inter ON/OFF. • External led. • Voltage drop compensation wires. • Alarm relay output. 12 V / 50 A 24 V / 30 A 36 V / 20 A 48 V / 15 A Experts since 1985 in the conversion of electrical energy, for powers ranging from 50 to 3000 W, TECSUP has developed a range of high output battery chargers, adapted for all types of batteries: lead open, sealed (AGM, Gel, spiraled), Lithium. Compact, powerful, lightweight, the POWER-TEC 800 series chargers are perfectly suitable for industrial and ‘customized embedded’ applications. They offer an invariable charge rate and an optimized layout, adjusted to every need (charging curves 3 or 5 states, definable parameters). POWER-TEC 800 12 V / 50 A - 24 V / 30 A 36 V / 20 A - 48 V / 15 A