BATTERY CHARGER Optimized performances • PFC > 98%. • Input current < 16 A • Efficiency > 89%. • Usable with a wide range of power sources (mains, generator….). • Charging curves 3 or 5 states. • Constant voltage curves (power supply). • Output ripple < 50mVrms. • Extruded and anodised aluminium box. Safety • Electronic protection against input surges & short circuits on output. • Automatic electronic protection against polarity inversions (no fuse to change). • Ingress Protection standard : IP 20. • CE conformity. • Electromagnetic compatibility (EMC): EN 55022, class A. • User safety: EN 60335-1, EN 60335-2-29 ; EN 50366. Frontal display • A led indicates the mode of working of the charger: - Yellow: “Boost” - Green: “Floating” - Red: “Battery default” - 2 year warranty. - Listening to and proximity with clients. - Knowledge of conditions of use. - Specific versions on request. Output (voltage / current) Input voltage Power Frequency DC Output Charging curve (external rotary switch) Working temperature Fan Dimensions (mm) Weight Inlet connector Outlet connector ENGINEERING Solutions created & developed to measure CATALOGUE Standard solutions, customizable & modular APPLICATIONS Solutions dedicated to your sector of activity MODELS Predeveloped Solutions 32, route des Moulins - BP 116 - 74410 SAINT-JORIOZ - ANNECY - FRANCE Tel. : +33 (0)4 50 68 96 22 - Fax : +33 (0)4 50 68 96 34 - [email protected] - www.tecsup.fr Other versions available at request: From 70 up to 260 VAC (universal voltage) U > 200 VAC : 3 200 W U < 200 VAC : progressive power derating 50 / 60 Hz. High frequency technology 1 16 pre-set charging curves in memory. Full power : –25°C to +40°C. Progressive derating from +40°C up to +70°C. Variable fan speed depending on temperature. 400 x 250 x 80. 7,1 Kg. Wire 3G1².5² (lenght 2 m) + overmoulded Schuko plug Connector block Options • Series connections, parallel connections (master/slave). • Specific algorithms for the lithium batteries. • Liaison RS 232 to PC. • Temperature compensation sensor. • Remote control. • Inter ON/OFF. • External led. • Voltage drop compensation wires. • Alarm relay output. 12 V / 200 A 24 V / 125 A 36 V / 80 A 48 V / 60 A Experts since 1985 in the conversion of electrical energy, for powers ranging from 50 to 3000 W, TECSUP has developed a range of high output battery chargers, adapted for all types of batteries: lead open, sealed (AGM, Gel, spiraled), Lithium. Compact, powerful, lightweight, the POWER-TEC 800 series chargers are perfectly suitable for industrial and ‘customized embedded’ applications. They offer an invariable charge rate and an optimized layout, adjusted to every need (charging curves 3 or 5 states, definable parameters). POWER-TEC 3200 12 V / 200 A - 24 V / 125 A 36 V / 80 A - 48 V / 60 A