Em i s s i o n L i n e 1 .0 1 1 .0 1 Co o l i n g a n d Co n d e n s i n g De v i c e s These devices have been realized especially to protect the sampler from the excessive heat and the condense in fumes that could damage the pump and the dry gas meter. They are used also for the determination of the moisture in fumes. TCR Tecora offers different solutions to satisfy different stack sampling and analysis requirements. Portable Cooling and Moisture Device Cooling and moisture collecting system with glass impingers. This solution solves the double task of cooling the sampled gas and moisture collecting for the determination of water vapour contents in fumes. Realized into a robust, portable and athermic container, it can be used with water/ice. A useful handle allows to carry the device. It has been realized to allow the use with the cover closed, taking advantages of the isolating capability offered by the special box. Inside the container there are four impingers (two with plate and two with straight tube) located hanging on an aluminium rack. Quick connectors for gas inlet and outlet. Cooling Device without glass impingers Set of 4 impingers New athermic box P/N AD99-001-0201SP P/N AD99-001-0202KP Spare parts list: Description 1. 500 cc glass impinger with straight tube 2. 500 cc glass impinger with plate 3. Male glass spherical hose barb 4. Female glass spherical hose barb 5. n° 5 Lock clips for spherical hose barb 6. Fast connector on gas outlet 7. Silicone tube 0.9 m length 8. Set of n° 10 O-Rings P/N AD99-008-0110SN AD99-008-0111SN AC99-090-9997SN 999VE150 AD99-001-0211KR 999EA420 999SA009 999UA101 7 2 1 4 1 2 3 6 5 1 lt Capacity Silica Gel Trap The silica gel trap of 1 lt capacity is made of transparent plastic, allowing the verification of the saturation state of the silica gel. In order to avoid the silica dust to enter the sampler, the trap incorporates a polyurethane foam filter. P/N AD99-012-0010SP