Em i s s i o n L i n e 1 .0 1 2 .0 1 Coo l i n g a nd Con de ns i n g Dev i c es M ai n Char ac t er i st i c s : · 6 liter capacity tank in stainless inox · Refrigerator group with CFC free gas · Reduced dimensions and weight The cooling and condensing systems are very important for the survey results as well as for the sampler's protection. IGLOO is different from other cooling and condensing devices, as it is equipped with an independent refrigerating system. This characteristic allows the unit to operate for long terms, without ice or water at low temperature. Igloo is also available in the following versions: IGLOO P Equipped with a refrigerating pump, activated by a separated switch. Accessories and Glassware Set of n° 4 500 cc stack impingers with glass ball joint connectors located in an aluminum rack with outlet, inlet hose barbs and leak test valve. P/N AC99-002-0116KP Set of n° 4 500 cc stack impingers located in an aluminum rack with outlet inlet hose barbs and leak test valve P/N AC99-002-0115KP 1. n°4 impingers 500 cc 2. n°2 gas inlet outlet hose barbs 3. n°3 "U" tubes for impingers connection 4. Aluminum rack with leak test valve and gas in/out hose barbs 5. Fast connector 6. n.8 fixing clamps for ball joint 7. Silicone tube 1. n.4 impingers 500 cc 2. AluminIum rack with leak test valve and gas in/out hose barbs 3. Fast connector 4. Silicone tube IGLOO HP Incorporates a refrigerating pump and two thermoregulators for Tecora’ heated probe regulation. s Tec h ni c al Char ac t e r i s t i c s : Cooling device nominal power Temperature regulation range Power supply Dimensions and weight IGLOO P/N IGLOO Dimensions and weight IGLOO P P/N IGLOO P Dimensions and weight IGLOO HP P/N IGLOO HP IGLOO HP 200 W from -8°C to amb. temp. (+/- 3°C) 220/240 Volt 50Hz 340x260x450 mm - 19 Kg AC99-002-0000SP 460x260x450 mm - 21 Kg AC99-002-0008SP 460x260x450 mm - 22 Kg AC99-002-0010SP