Emission Line Automatic Isokinetic Sampler Description EmiTest Iso is the last generation of isokinetic samplers compliant with international testing methods:  EN13284-1  US EPA M5  USEPA M17  ISO9096 It combines our knowledge on isokinetic samplers with new approaches to ensure: - Better data quality and reliability, - Easier use on stack, - Time saving, - Workers safety. Main specifications Sampling main view - Fast isokinetic control at any stack condition. - Volume measurement with dry gas meter. - Sampling flow measurement with differential pressure flowmeter. - In-stack temperature and velocity measurement. - Autotest and anomalies management. - USB interface to download data. - Large color touchscreen. - Wide library to recorded ducts specifications. - Data logger enabling data download on USB key. - Large internal memory (16 GB). - Reduced maintenance. - ISO17025 accredited laboratory certificate (optional). Data in sampling view Technical specifications may change without previous warning Headquarters: Rue Anne Gacon-Village Entreprise St Henri Bât. n°23, 13016 Marseille Office CDL – Tecora: 10 rue de la Prairie 91140 Villebon sur Yvette Phone: +33 (0)1 81 87 08 84 - www.teco

Emission Line Probe module One of the main innovation of EmiTest Iso is the probe module. This module, directly attached on probe, manages: - Velocity measurement sensors: Pitot differential pressure, stack pressure and temperature, - Probe and box heating control, - Bath and impingers temperature measurement, - Angle measurement (optional). Main advantages are: - Better accuracy of differential pressure measurement (shortest distance between sensor and Pitot head) - Lighter umbilical cable - Deported screen plugged on probe module for sampler remote control (optional) : avoid manutention of...

Emission Line New features - Sensors test mode with results saved in memory for better QA/QC management - Angle measurement (optional) - Swirl angle and wall factor measurement - Stagnation check - Pitot leak check - New leak test calculation - Large choice of languages - Possibility to set the alarms (for each measure : alarms levels, alarm delay, effect of alarm…) - Deported screen plugged on probe module for sampler remote control (optional) Leak test view User-friendly New user interface has been designed to be used easily: - New ergonomic interface for data visualization - Large touchscreen...

Emission Line Technical characteristics Differential pressure (Pitot and flowmeter) ± 6689,5 Pa (equivalent to +/-1 Psi) Better than 1% of measure 1 Pa 35 kPa Absolute pressure (static and barometric) Range 0 – 103.4 kPa absolute Accuracy Better than 1% of measure ± 0.1 kPa Resolution 0.01 kPa Temperature N° of inlet for thermocouple K type Up to 3 (2 for heating control + 1 stack temp.) Resolution 0.1 °C Thermocouple type K 0 to 1200 °C Accuracy 1% of measure ± 0.2 °C N° of PT100 probe Up to 3 (incl. DGM temperature) Range -20 to 80 °C Accuracy 1% of measure ± 0.2 °C Resolution 0.01 °C Volume...