Sliding joint clamp

Product catalog summary

Specifications:
Materials: The clamps are made of acetal in white color, with guide pins and bolts made of stainless steel.
Features: These clamps are designed to connect straight sections of transport guides with curved ones, accommodating curvature variations during format changes. They are intended for use with guides that have a 1.5 mm thick metal profile. The recommended maximum tightening torque is 0.4 Kgm.
Box Quantity: Each box contains 2 pieces.
On Request: Clamps can be provided in different colors and box quantities can be adjusted as per request.

Procedures:
Application involves using the clamp in both closed and open positions to adjust the side guides' cross adjustment width. The clamp rods should be moved closer together or further apart while maintaining parallel alignment to the bisector of the 90° angle.

Product Codes:
Part.420 - Cod. 90454
Part.354 - Cod. 90455
Part.551 (H=15.5) - Cod. 90456

Example of Application:
Illustrations show the clamp in both closed and open positions, with sections A-A, B-B, and C-C for Parts 420, 354, and 551.

Catalog excerpts

Conveyor components Product / chain guides and accessories O Jergo Sliding joint clamp part 549(for guides with 1.5 mm thick metal profile) Cod. 90454 - Sliding joint clamp for Part.420 Sec.A-A Sec.B-B MATERIALS: Clamp in acetal white colour; guide pin and bolts in stainless steel. FEATURES: The clamps allow the connection of the straight sections of the transport guides with the curved ones, compensating for the variations in curvature during format changes. To be used only together with guides with a 1.5 mm thick metal profile. Recommended maximum tightening torque: 0.4 Kgm. BOX QUANTITY: 2 pieces. • Clamps: In different colours. • Box quantity: According to your request. Technology Components

Open the catalog to page 1

Sliding joint clamp

Sliding joint clamp

Catalog excerpts

All Tecom catalogs and technical brochures