Catalogs >
Tecnotion >
Vacuum-UXXV G2 series

Vacuum-UXXV G2 series
2Pages

Catalog excerpts

UXXV - G2 ironless vacuum series Parameter Winding type Continuous force passive cooled* Continuous force active cooled** Maximum speed*** Peak current Max. cont. current passive cooled* coils @ Tmax Max. cont. current active cooled** Peak force @ 20°C/s increase Motor constant UXXV18 G2 coil unit in 456mm magnet yokes Motor force constant Motortype, max voltage ph-ph coils @ Tmax Electrical time constant Maximum continuous power loss Maximum coil temperature Thermal resistance Thermal time constant* Temperature cut-off / sensor Explanation of name U = Ironless XXV = Series type/vacuum 6 / 9 / 18 = Number of coils N / S = Winding type Coil unit weight Coil unit length Motor attraction force Lead wire type (Power, 4x) UXXV G2 Lead wire weight Lead wire type (Sensor, 4x) * Depends on environmental conditions in the application. Continuous force noted has been determined with a typical thermal resistance value for passive cooling, and a vacuum chamber wall of 40°C. ** Depends on environmental conditions in the application. Continuous force noted has been determined with a thermal resistance of 0.02 K/W and a mounting surface of 20°C when the motor is driven at max. continuous current. *** Actual values depend on bus voltage.

Open the catalog to page 1

Magnet yokes Coil units UXXV Magnet yoke dimensions Le (mm) Magnet yokes can be butted together. Mounting instructions and flatness or parallelism requirements can be found in the Ironless installation manual. 3D CAD files can be downloaded from our website.

Open the catalog to page 2

Vacuum-UXXV G2 series 2Pages

Catalog excerpts

All Tecnotion catalogs and technical brochures

Vacuum-UXXV G2 series
2Pages